Electric hot plate with thermostat controlled bearing heating

The electric hot plate HP 200C Series is especially suitable for heating small bearings or small machine parts.

The temperature is infinitely variable from 50°C to 200°C. (122°F to 392°F)

- Available in the power versions 230V/50Hz and 110V/60Hz
- Protective cover prevents from contamination of the work pieces during the heating process. Additionally, the parts are heated faster if the cover is closed
- Temperature display
- Contact surface: 380 x 180mm

HPL-110V

SNR Bearings

The right combination of impact ring and mounting sleeve ensures the effective transmission of mounting force. The simultaneous support of the outer and inner rings prevents the risk of deterioration of the races and rotating assemblies.

The kit is also suitable for the mounting of other components such as handles, spacers, sealing rings, seals, pinions and pulleys.

Features include:
Light and strong construction for workshop use.
Very robust for a long working life with impact-resistant, synthetic material, avoiding any metal-to-metal contact ideal for use in conjunction with a press.
Calibrated for approximately 400 different bearings with bore diameters between 10 and 50mm and with outside diameters between 26 and 110mm.
Clearly and permanently identified to aid selection.

Bearing Installation Kit

Kit Contains:
33 impact rings for bore diameters 10 to 50mm and outside diameters of 26 to 110mm.
3x Mounting sleeves, light and extremely robust, made of aluminium with a good grip for the hand.
1x Dead blow mallet, anti-bounce, shot-loaded to ensure maximum impact
Supplied in carry case.

FASTTHERM-150 BEARING HEATER

Compact induction heater, economical, providing high heating capacity for bearings of up to 150 kg
Powerful mobile induction heater for bearings up to 150kg. Ergonomically designed and with its mobile core arm the parts to be heated can be positioned easily. Fitted on a trolley with a core bar storage shelf, it can be moved quickly and safely around the various areas of the production floor. Designed for all bearings and rotating parts in a horizontal position.. Delivered as standard with core bars. Max weight 150kg. Min bore diameter 30mm. Max outside diameter 490mm. Voltage 400v.

SNR FAST THERM 300 induction heater - 400V

Powerful mobile induction heater for bearings up to 300 kg. Ergonomically designed and with its mobile core arm the parts to be heated can be positioned easily. Fitted on a trolley with a core bar storage shelf, it can be moved quickly and safely around the various areas of the production floor. Designed for all bearings and rotating parts in a horizontal position.. Delivered as standard with core bars. Max weight 300kg. Min bore diameter 30mm. Max outside diameter 740mm. Voltage 400v.

IH025

The IH 025 VOLCANO marks the start of a new era of portable induction heaters. You can use it to heat bearings with an inner diameter as small as 20mm up to on outer diameter of 160mm and a weight of up to 10kg for easy fitting.

• Portable, compact and very light (3.5 kg)
• A 5kg bearing can be heated to 110°C in less than four minutes.
• No support yokes required – simply place the bearing on the cone (20mm to 160mm o/d with just one
portable device)
• Predictive Temperature Control (PTC) for automatic temperature monitoring.
Ask your local service centre today for more information on this unique time saving product.


Volcano Bearing Heater

IH025

The IH 025 VOLCANO marks the start of a new era of portable induction heaters. You can use it to heat bearings with an inner diameter as small as 20mm up to on outer diameter of 160mm and a weight of up to 10kg for easy fitting.

• Portable, compact and very light (3.5 kg)
• A 5kg bearing can be heated to 110°C in less than four minutes.
• No support yokes required – simply place the bearing on the cone (20mm to 160mm o/d with just one
portable device)
• Predictive Temperature Control (PTC) for automatic temperature monitoring.
Ask your local service centre today for more information on this unique time saving product.


SIMAIH025-VOLCANO/230V

SNR FAST THERM 20 Portable Induction Heater

Small, light, easy to use heater ideal for working on site. Designed for all bearings and rotating parts with a bore diameter above 20mm with a maximum diameter of 280mm and a maximum weight of 20kg. Delivered as standard with core bars and a sturdy carrying case.
weight: 17kg.

Electric hot plate with thermostat controlled bearing heating

The electric hot plate HP 200C Series is especially suitable for heating small bearings or small machine parts.

The temperature is infinitely variable from 50°C to 200°C. (122°F to 392°F)

- Available in the power versions 230V/50Hz and 110V/60Hz
- Protective cover prevents from contamination of the work pieces during the heating process. Additionally, the parts are heated faster if the cover is closed
- Temperature display
- Contact surface: 380 x 180mm

HPL-230V

SNR FAST THERM 35 Induction Heater

Compact, easy to use heater ideal for working on site. Designed for all bearings and rotating parts with a bore diameter above 20mm with a maximum diameter of 410mm and a maximum weight of 35kg. Delivered as standard with 70mm core bars.
weight: 31kg.

SNR FAST THERM 20 Portable Induction Heater

Small, light, easy to use heater ideal for working on site. Designed for all bearings and rotating parts with a bore diameter above 20mm with a maximum diameter of 280mm and a maximum weight of 20kg. Delivered as standard with core bars and a sturdy carrying case.
weight: 17kg.