3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

361F Cloth Discs

Tough resin bonded aluminium oxide disc for grinding and stock removal. Applications such as weld grinding and finishing.
Maximum rpm. 25mm Discs = 25000 rpm.
38,50 & 75mm Discs = 20000 rpm.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

361F Cloth Discs

Tough resin bonded aluminium oxide disc for grinding and stock removal. Applications such as weld grinding and finishing.
Maximum rpm. 25mm Discs = 25000 rpm.
38,50 & 75mm Discs = 20000 rpm.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

361F Cloth Discs

Tough resin bonded aluminium oxide disc for grinding and stock removal. Applications such as weld grinding and finishing.
Maximum rpm. 25mm Discs = 25000 rpm.
38,50 & 75mm Discs = 20000 rpm.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

Surface Conditioning Discs

Reinforced Scotch-Brite web designed for cleaning and finishing on all metals. Leaves a burr-free surface for painting and coating for removal of light rust, oxides and coatings.
Maximum rpm.25mm Discs = 25000rpm.
50mm Discs = 23000rpm.
75mm Discs = 18000rpm.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

777F Cloth Discs

High performance disc with ceramic Cubitron abrasive mineral for use on stainless steels.
Maximum rpm. 25mm discs = 25,000rpm.
38, 50 & 75mm discs = 20,000rpm.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

777F Cloth Discs

High performance disc with ceramic Cubitron abrasive mineral for use on stainless steels.
Maximum rpm. 25mm discs = 25,000rpm.
38, 50 & 75mm discs = 20,000rpm.

York? Quick Change Screw Fitting Discs

For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC? system holders.



Zirconia Alumina Abrasive Discs for grinding and finishing of stainless steel.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

361F Cloth Discs

Tough resin bonded aluminium oxide disc for grinding and stock removal. Applications such as weld grinding and finishing.
Maximum rpm. 25mm Discs = 25000 rpm.
38,50 & 75mm Discs = 20000 rpm.

York? Quick Change Surface Preparation Disc Kits

Multi purpose kits for grinding and stock removal applications such as weld grinding and finishing, rust removal. Suitable for use on mild contours. Designed for cleaning and finishing on all metals. Leaves a burr-free surface ready for painting or coating. Can also be used for the removal of light rust, oxides and coatings. Compatible with 3M ROLOC? system.

12 Piece 75mm Diameter

Multi-purpose kit containing: one of each surface preparation disc fine, medium and coarse. Two of each abrasive disc grades P36, P60, P80 and P120. One 6mm diameter shank to fit the backing pad.

York? Quick Change Screw Fitting Discs

For general use including blending welds and removing machining marks. Also suitable for use on mild contours as well as flat surfaces. Quick change screw fitting ensures that the disc is always perfectly centred without adhesive, moving parts or centre screw damage to the workpiece. Higher speeds can be attained resulting in faster stock removal reduced man-hours and increased productivity. Available in 25mm, 38mm, 50mm, 75mm and 100mm diameters for the abrasive discs. Also available in a surface preparation material that is designed for smoothing surfaces prior to painting, removing rust, oxides, imperfections and blending out grit disc marks to produce fine finishes on metal. All discs are compatible with 3M ROLOC? system holders.



Zirconia Alumina Abrasive Discs for grinding and finishing of stainless steel.