3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

3M 245 Hookit™ Discs

Stiff E-weight paper gives a strong backing and long product life. Resin bond resists heat to prevent premature "burning". For initial and intermediate sanding on solid wood furniture, wood and metal door frames and other hard and soft wood, plastic and metal surfaces.
Use on: Wood, Metal, Paints, Fillers, Plastics.
Mineral: Aluminium Oxide.
Backing: E Weight Paper.
Coating: Open.
Bond: Resin.

Plain (no holes)

Diameter: 150mm.

Kennedy® Velcro-Backed Sanding Discs

No spanners required to change discs. 100% of sanding disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied again and again. Unaffected by dust or moisture. Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

Plain (No Holes)

Diameter: 150mm.

SIA Fibre Discs

4819
Tough durable Zirconia grain with grinding aid to reduce heat build up and glazing. Strong fibre backing to give maximum grain support on arduous applications. Excellent life and cut to reduce down time and consumable costs, ideal for mild and stainless steel applications. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 180mm.

180mm Diameter x 22mm Bore (Max 7,000rpm)

338U Plain Stikit™ Sheets

Abrasive C paper backed sheets with a special self adhesive system that ensures the product remains firmly in place whilst in use but is easy to apply and quick to remove. Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers, solid surface materials and plastics.



Plain (no holes)

SIA Fibre Discs

4819
Tough durable Zirconia grain with grinding aid to reduce heat build up and glazing. Strong fibre backing to give maximum grain support on arduous applications. Excellent life and cut to reduce down time and consumable costs, ideal for mild and stainless steel applications. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 180mm.

125mm Diameter x 22mm Bore (Max 10,000rpm)

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

York? Adhesive Backed Discs

Adhesive backed aluminium oxide paper discs requiring no tools to change the disc, when the abrasive becomes worn or a different grit is needed just peel off and apply a fresh disc, reducing machine downtime therefore increasing productivity.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm.

York? Adhesive Backed Discs

Adhesive backed aluminium oxide paper discs requiring no tools to change the disc, when the abrasive becomes worn or a different grit is needed just peel off and apply a fresh disc, reducing machine downtime therefore increasing productivity.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm.

3M 266L Hookit? Discs

Micron graded aluminum oxide resin bonded to a 3 mil polyester film backing. Open coat abrasive surface is coated with a dry lubricant to resist loading. Sold as discs & sheets with hook backing for attachment to loop faced back up pads. Easy to re-use.

Hole Pattern: 500A. 5 Hole.

Diameter: 125mm.