7 Piece Panel Beating Set

A comprehensive panel beating set containing: 1 x 12oz shrinking hammer.1 x 12oz flat faced bumping hammer. 1 x 10oz round finishing pick.1 each: curved 1.2kg, utility 1.2kg, heel and toe dolly.The hammerheads are manufactured from forged high carbon steel and then ground and polished on the faces and cheeks to a mirror finish. The hammer shafts are manufactured from solid hickory, with an octagonal cross section for improved grip and control when in use. The dollies are manufactured from drop forged medium carbon steel (SAE/AISI 1055) then heat treated and polished to a high mirror finish. Each one is laser etched for easy identification.Supplied in an impact resistant case that prevents the hammers and dollies clashing together and damaging the high polish finish, whilst in transit.

What "Practical Classics" magazine say..."Best Buy"

"Full house to this excellent value set. The four dollies are beautifully finished and profiled, and are a good usable weight. The hammers are also superb, combining decent weight, well shaped shafts and good length. The faces are big enough for effective planishing too. Final plus point is the moulded case, which prevents the contents bashing together."