Kobe? Needle Scaler Attachment

Converts a pneumatic hammer into a needle scaler.

Kobe 125mm (5") Angle Grinder

Suitable for metal dressing, rust removal, weld preparation and automotive bodywork fabrication. Rubber cushioned side handle provides grip and operator comfort. Side handle can be positioned for left or right hand operation. Lightweight composite body reduces the effects of vibration and hand chill. Spindle lock button. Safety guard is easily rotated, without the need for tools. Safety lever throttle. Rear exhaust.

FGA130g

Disc size: 125mm (5??).
Spindle size: M14 x 2.0mm.
Free speed: 10,000rpm (Governed).
Air inlet thread: 1/4?? NPT.
Minimum air hose size: 10mm (3/8??).
Air pressure: 6.2bar (90psi).
Motor power: 0.7hp.
Air consumption: 113Ltr/m* (4CFM).
Sound power level: 92dB(A).
Sound pressure/noise level: 89dB(A).
Vibration level: 1.2 m/s2.
Overall length: 240mm.
Net weight: 1.96kg.

*Based on a 15 second cycle per minute average use.

Kobe™ Collet Nuts

To suit Kobe and similar die grinders.
SM-51225 Collet Nut - Short
SM-55225 Collet Nut - Long

Dynabrade Pencil Micro Air Die Grinder

51731
Precision deburring & grinding. Excellent for use on tooling, dies, molds, production parts and more. Polishing, etching, wax forming, routing, bevelling, dulling, shaping, flash removal, and trimming & cutting CNC machining. Ceramic bearings provide better performance and durability with regard to high shaft speeds, dirt, extreme temperature, corrosion and other environmental factors. High-speed air motor, controlled with patented governor, provides constant speed under load. Precision, high-tolerance, low run-out collet.

Specifications:
1/4" NPT air inlet.
0.1hp motor.
Rear exhaust.
3mm collet.
Overall length: 133mm.
Noise level: 69dB(A).
No load speed: 60,000rpm
.

Kobe™ 1" Drive Heavy-Duty In-Line Air Impact Wrench

Suitable for industrial and commercial production and assembly applications. Side handle for two handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Specifications:
Free speed: 3,300rpm.
Final drive: 1" (25mm) hex.
Working torque: 2,030Nm (1500lb.ft.).
Maximum torque: 2,300Nm (1700lb.ft.).
Safe working pressure: 90psi (6.2bar).
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 90PSI (6.3Bar).
Air consumption: 0.7CFM.
Sound pressure level: 87dB(A).
Vibration level: 5.9m/s2.
Overall length: 500mm.
Weight: 9.34kg.

Kobe™ Extended Spindle Die Grinder

FDG180e
For polishing, buffing, deburring and grinding. Rubber handle provides grip and operator comfort. Extended head for flexibility in tight areas. Speed regulator. Safety release throttle. Rear exhaust. Ball bearing construction for long tool life.

Box contents: Extended die grinder, two collet spanners and a comprehensive instruction manual.

Specifications:
Free speed: 25,000rpm.
Collet size: 6mm.
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8" (10mm).
Air pressure: 90PSI/6.2Bar.
Air consumption: 4CFM*.
Sound pressure level: 91dB(A).
Sound power level: 98dB(A).
Vibration level: 4.53m/s2.
Overall length: 253mm.
Net weight: 657gm.

*Based on a 15 second cycle per minute average use.

Kobe? 1" Drive Heavy-Duty Pistol Grip Air Impact Wrench

Front or rear mounting spring balance loop. Easy to use forward/reverse switch and 3 position power regulator. Forward facing exhaust. Oiling points for daily maintenance.

Specifications:
Safe working pressure: 90psi (6.2 bar).
Free speed: 3,400rpm.
Final drive: 1" (25mm) hex.
Working torque: 2,170Nm (1600lb.ft).
Maximum torque: 2,440Nm (1800lb.ft).
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2"(13mm).
Air pressure: 90PSI (6.3Bar).
Air consumption: 5.95CFM.
Sound pressure level: 87dB(A).
Vibration level: 5.9 m/s2.
Overall length: 295mm.

Chicago Pneumatic® 10mm (3/8") Quick Change Air Drill

RP9287
10mm (3/8") keyless chuck with direct exhaust from the operator workpiece - very versatile. Good productivity and durability. Suitable for many applications.
No load speed: 2.900rpm.
Chuck capacity: 10mm (3/8").
Maximum torque: 5.3Nm (3.91 ft-lbs).
Noise level: 89dB(A).
Vibration: 2.5m/s2.
Length: 199mm (7.83").
Weight: 1.15kg.

Chicago Pneumatic CP872 Air Die Grinder

Standard duty air die grinder features an adjustable speed regulator for precise control and lock off throttle to prevent accidental startups.
Air consumption: 6.5cfm.
Free speed: 22000rpm.
Air inlet size: 1/4”.
Min. hose size: 3/8”.
Collet size: 1/4” and 6mm.
Overall length: 137mm.

3M Air-Powered File Belt Sander

28366
Ideally suited for use with 3M? Abrasive and Scotch-Brite Belts for a variety of metalworking applications. Grind, deburr and blend from contact wheel or platen, finish and polish from slack of belt. Lightweight, durable construction and 0.6HP motor helps provide an excellent power to weight ratio.

Both belt head and handle rotate a full 360 degrees to easily access hard-to-reach areas. Innovative belt cover allows easy access for quick belt changes. 3M Greptile grip gives a comfortable and secure grip. Warm composite housing minimises vibration for less operator fatigue.

3M exhaust system acts to reduce noise levels, clear debris and maintain cool belt running for enhanced results.

The 3M File Belt Sander comes complete with one standard arm 28368), 3M Air Tool Lubricant (20451) and both a steel and rubber drive wheel.

No load speed: 22,000rpm.
Belt size: 13 x 457mm.
Overall length: 370mm.
Weight: 1.30kg.

A full range of optional arms are also available to suit belts from 3mm - 19mm wide and up to 610mm long.