Indexa Type SOPP Horizontal and Vertical Rotary Table

With a disengageable worm gear which allows rapid indexing. One rotation of handle equals four degrees on collar. The table is made of high grade cast iron. Works as an indexing unit in the vertical position as well as a conventional rotary table for circular cutting, boring or angle setting, etc. Optional dividing plates are available separately.



Accuracy:
Parallelism of clamping surface to base: 0.020mm.
Flatness of clamping surface: 0.015mm.
True running cylindrical centre bore: 0.020mm.
True running of tapered centre bore: 0.020mm.
Squareness of clamping surface to centre slot: 0.010mm.

Indexing Units

Ideal for indexing items to be machined in pre-set or manually set incremental angles.
Indexing accuracy 25" (seconds)

Angular indexing
Through the graduation ring from 0 to 360 degrees in 1 degree increments

Basic indexing
By means of a catch device permitting divisions of 2,3,4,6,8, 12 and 24 without disassembly.

Fitted with standard 3 jaw self-centreing scroll chuck with 2 sets of jaws, for inside and outside gripping.

Indexing Unit (210mm Chuck Diameter)

Rotary Table Spares

Dividing plate for Indexa rotary tables.

Indexa Type SOPP Horizontal and Vertical Rotary Table

With a disengageable worm gear which allows rapid indexing. One rotation of handle equals four degrees on collar. The table is made of high grade cast iron. Works as an indexing unit in the vertical position as well as a conventional rotary table for circular cutting, boring or angle setting, etc. Optional dividing plates are available separately.



Accuracy:
Parallelism of clamping surface to base: 0.020mm.
Flatness of clamping surface: 0.015mm.
True running cylindrical centre bore: 0.020mm.
True running of tapered centre bore: 0.020mm.
Squareness of clamping surface to centre slot: 0.010mm.

Indexa Type SOPP Horizontal and Vertical Rotary Table

With a disengageable worm gear which allows rapid indexing. One rotation of handle equals four degrees on collar. The table is made of high grade cast iron. Works as an indexing unit in the vertical position as well as a conventional rotary table for circular cutting, boring or angle setting, etc. Optional dividing plates are available separately.



Accuracy:
Parallelism of clamping surface to base: 0.020mm.
Flatness of clamping surface: 0.015mm.
True running cylindrical centre bore: 0.020mm.
True running of tapered centre bore: 0.020mm.
Squareness of clamping surface to centre slot: 0.010mm.

Indexing Units

Ideal for indexing items to be machined in pre-set or manually set incremental angles.
Indexing accuracy 25" (seconds)

Angular indexing
Through the graduation ring from 0 to 360 degrees in 1 degree increments

Basic indexing
By means of a catch device permitting divisions of 2,3,4,6,8, 12 and 24 without disassembly.

Fitted with standard 3 jaw self-centreing scroll chuck with 2 sets of jaws, for inside and outside gripping.

Indexing Unit (167mm Chuck Diameter)