Industrial Melting Pots

A range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc., for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperature controlled from 50C to 200C. Constructed from anodised aluminium with ceramic fibre insulation. Pots supplied with 2M cable and fused plug, lifting handle, double-wall heat-conserving lid, on/off switch and safety thermal cut-out. 220/240V as standard.

Protective Coating Red-Hot-Dip

Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).

RD160 - Red colour

Weight: 25Kg

ADHAESIUM Machine Mounting Compound

ADHAESIUM is a unique mounting system, which does not rely on bolting & grouting, and can be applied and used without destroying surface and floor slab integrity. It is intended for use to site and secure medium and heavy engineering machinery such as lathes, presses, punches etc. A major benefit of the use of ADHAESIUM is that equipment can be easily removed and re-sited, without detriment to either floor or machine base. Used by Chemical Engineering, Electrical Engineering.

Specifications:
Shelf life 24 months.
Available as a 2 metre x 10cm per pack.
Ease of use.
Ready for use without preparation.
No premixing or substantial preparation prior to installation, thereby reducing costs.
Does not require special tools or skills for installation.
No drilling or grouting required.
Installation times reduced.
Machinery can be easily removed and re-sited, without detriment to the machine base and floors.
No heavy lifting machinery required to site plant and equipment into place.
Suitable in situations where overhead lifting tackle is not available.
Positive machinery alignment with minimum effort.
Scientifically shown to reduce vibration and noise transmission, reducing operator fatigue - with consequent benefits to production.
Water-based - Non toxic, low hazard.
Can withstand high operating temperature without detriment - suitable where floor heating is installed.

Protective Coating Red-Hot-Dip

Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).

AD160 - Amber colour

Protective Coating Hot Dip Granules

Strippable plastic coating provides 100% coverage and protects against corrosion and impacts. The component protected can be easily identified through the translucent coating. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot.
SH25 Amber colour.
Working temperature 130°C to 160°C.

Industrial Melting Pots

A range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc., for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperature controlled from 50C to 200C. Constructed from anodised aluminium with ceramic fibre insulation. Pots supplied with 2M cable and fused plug, lifting handle, double-wall heat-conserving lid, on/off switch and safety thermal cut-out. 220/240V as standard.

Protective Coating Red-Hot-Dip

Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).

AD160 - Amber colour

Weight: 25Kg

Protective Coating Red-Hot-Dip

Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).

RD160 - Red colour

Industrial Melting Pots

A range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc., for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperature controlled from 50C to 200C. Constructed from anodised aluminium with ceramic fibre insulation. Pots supplied with 2M cable and fused plug, lifting handle, double-wall heat-conserving lid, on/off switch and safety thermal cut-out. 220/240V as standard.

Industrial Melting Pots

A range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc., for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperature controlled from 50C to 200C. Constructed from anodised aluminium with ceramic fibre insulation. Pots supplied with 2M cable and fused plug, lifting handle, double-wall heat-conserving lid, on/off switch and safety thermal cut-out. 220/240V as standard.