York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

3mm Shank

30mm Dia x 10mm Height 20,400 MOS (rpm)

3M Green Corps? Flexible Grinding Discs

A range of Green Corps? flexible grinding discs which provide a fast cut smooth finish on a variety of metals. They can offer substantially reduced levels of vibration when grinding. Ideal for weld grinding, de-scaling, heavy deburring and deflashing of flame cut parts. To be used with back-up pads.

Grinding Disc Kits

Contents: 20 Discs plus 2 Back Up Pads.

Zirconium Abrasive Flap Discs

'JET Zirkon' Zirconium abrasive discs with intergrated M14 adaptors for quick mounting and reinforced glass fibre backing with 'cooling slots' for air-cooling. Fully resinoid bonded with fillers for active grind support. Self-sharpening ceramic grain for extremely high stock removal as well as a long service life.

J-AZA

York? Flap Wheel Sets

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Recessed hub design for maximum access in tight corners.

8 Piece - 6mm Shank

Contents: 30 x 15mm: P60, 30 x 15mm: P120, 40 x 15mm: P60, 40 x 15mm: P120, 50 x 20mm: P80, 50 x 25mm: P60, 60 x 30mm: P40, 60 x 30mm: P80.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 30mm Height 10,200 MOS (rpm)

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

127mm Dia x 22mm Bore 12,000 MOS (rpm).

Zirconium Abrasive Flap Discs

'JET Zirkon' Zirconium abrasive discs with intergrated M14 adaptors for quick mounting and reinforced glass fibre backing with 'cooling slots' for air-cooling. Fully resinoid bonded with fillers for active grind support. Self-sharpening ceramic grain for extremely high stock removal as well as a long service life.

J-AZA

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Recessed hub design for maximum access in tight corners.

All wheels are supplied individually. (Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s).

6mm Shank

80mm Dia x 20mm Height 7,700 MOS (rpm)

3M Flap Discs 566A

Good performance at an economical price. Available in P120 for finer blending, refining and finishing work.

Applications: weld grinding, stock removal, deburring, deflashing, gate removal, edge chamfering, cleaning, blending, finishing.
Materials: all metals.
Mineral: alumina zirconia.
Backing: X-weight cotton cloth on reinforced glass fibre resin.
Coating: closed.
Bond: resin.

Conical Flap Discs

Size: 180mm.
P40, P60, P80 and P120 grit.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 10mm Height 12,300 MOS (rpm)