Ratchet Combination Spanners - Metric

Ratchet combination spanners ideal for reaching in to awkward spaces. Ring head has a reversible ratchet system that gives small increments of only 5°. Both heads are angled at 15° for side access. Satin chrome finish. Conform to ISO 1711-1.

Industrial Open Ended Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

Metric

11mm Offset Chrome Vanadium Combination Spanner

Chrome vanadium steel. 15 cranked open end. Offset ring end. Conforms to DIN 3113B.

Short Arm Combination Spanners

Short arm (stubby) combination spanners manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion-resistant and easy to clean. The jaws and ring are offset at 15 for easier location and application of torque to the fastener. Ideally suitable for use in areas of very restricted access, in the automotive, aerospace and assembly industry. Conform to ASME B107.6.

Inch

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Miniature Open Ended Spanners

Conform to BS 192 : 1982 & DIN 3110.

Metric

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

A/F

Kennedy Professional Combination Spanner Set

The Kennedy Professional flexible head ratchet combination spanners allow easy access to fasteners in recessed areas or confined spaces as the ratchet head can function at any angle between 0 and 90.

All the spanners are manufactured from chrome vanadium steel with a corrosion resistant fully chrome plated mirror finish. The FRW013 set is supplied complete in a heavy duty fitted metal storage case fitted with locking lid and carry handle.

FRW013 Flexible Head Ratchet Combination Spanner Set 10 to 19mm

Contents:
Combination Bi-hexagonal ratchet wrenches: 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm.
Quick release square drive adaptors : 1/4" SD (x10mm hex); 3/8" SD (x13mm hex) & 1/2" SD (x19mm hex).
Supplied in a metal carrying case.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset. Conform to: 5.5mm - 25mm, 1/4? - 1? AF - DIN 3113. 26mm - 95mm, 11/16? - 2?AF - ASME B107.6.
1/8? - 1/2? Whitworth - DIN 3113 & BS192:1982. 9/16? - 7/8? Whitworth - ASME B107.6 & BS192:1982.

Metric

Metric

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.