Inch

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Short Arm Ratchet Combination Spanners

Short arm (stubby) combination spanners manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms to ANSI 8107.6.

T-Type Wrenches

Single Hex. Manufactured from chrome vanadium. For use in restricted areas.

Industrial Combination Spanners

Manufactured form industrial quality chrome vanadium steel, polished and hardened jaws and bi-hexagon ring with satin finish body, corrosion resistant. The open-ended jaws are offset at 15 angle for positive torque application and easier location on the fastener. Suitable for automotive, maintenance and engineering applications. Conform to ASME B107.9M 1994

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

Whitworth

Combination Spanners

Manufactured from drop forged steel with 15° cranked heads. Conforms to ASME B107.6.

Combination Spanners

Manufactured from drop forged steel with 15° cranked heads. Conforms to ASME B107.6.

10-19mm Flex Head Ratchet Wrenches

Open ended spanners. Flex head ratchet ring spanners. Square drive ratchets: 1/4", 3/8" and 1/2" drives. Chrome vanadium. Fully chrome plated with mirror finish. Heavy duty fitted storage case. Contents: ratchet combination wrenches bi-hexagonal (10mm - 19mm inclusive).
Quick release square drive adaptors - 1/4" SD (x10mm hex);
3/8" SD (x13mm hex); 1/2" SD (x19mm hex).

Professional Ratchet, Combination Spanners

Made from chrome vanadium steel with mirror polish finish. Mirror finish prevents oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5 movement to operate ratchet. Thin wall design for greater access. Conform to DIN 838 and ANSI 8107.6.

AF (Inch)

Crowfoot Wrenches

Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines and etc.

Crowfoot Wrenches

For use with with 3/8" square drive tools.