Industrial Open Ended Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

A/F

Industrial Open Ended Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

A/F

Professional Flare Ring Spanners

Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. Can be used on hydraulic pipes, brake pipes etc. The wrench will fit over the pipe to give a positive location on the nut. Conform to: ASME B107.4.

Metric

Conform with ANSI B107.9M.

Reversible Ratchet Ring Wrenches

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.

Straight

Metric *Single hexagon

Professional Ratchet, Combination Spanners

Made from chrome vanadium steel with mirror polish finish. Mirror finish prevents oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5 movement to operate ratchet. Thin wall design for greater access. Conform to DIN 838 and ANSI 8107.6.

Metric

Open Ended Spanners

Manufactured from chrome vanadium steel, hardened and ground jaws with narrow profile for easier access and use in confined areas. Suitable for industrial engineering applications. Conform to BS 1842 : 1952.

BA

Professional Combination Spanners

Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spanner, for easier cleaning and preventing corrosion. Long reach, wall drive. Conform with ANSI B107.9M.

Metric

Facom 39 Short Combination Wrenches

To ISO 7738, NF ISO 7738. Short shank and compact heads. Ideal where access is restricted. 12-point ring angled at 15°. 6-point ring angled at 15°. Satin chrome finish.

Inch

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

Metric

Metric

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.