Metric

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Kennedy Combination Spanner Sets

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Combination Spanner Set 6 to 24mm (18 Pieces)

Each Kennedy combination spanner in this 18 piece set is manufactured from industrial quality chrome vanadium steel with a corrosion resistant satin finish body and polished head. The open jaws are cranked at 15 and the Bi-hexagonal drive ring drive end is offset, to improve contact and make positioning the spanner on the fastener being tightened or loosened easier.

Set contents:
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 and 24mm.

`Fast Ratch` 240 Series Wrenches.

Applications targeted are AN fittings and B nuts on fuel supply lines, hydraulics, oxygen lines, as well as hex nuts and bolts. The Fast Ratch acts as an open-end, ratcheting wrench designed for aerospace, industrial, medical and food processing applications. Made from laser cut stainless steel the Fast Ratch meets DIN899 series C tool specifications. It is FOD free, non-sparking, and if cleansed in pure alcohol, can be used in oxygen system environments. Available now in sizes ranging from 5/16'' (8mm) to 3/4'' (19mm), the Fast Ratch speeds assembly or disassembly operations without damage to fittings or lines. Fast Ratch is self-centring and applies load to the flats of the fastener making it invaluable in tight applications and blind operations.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Whitworth

Kennedy Combination Spanner Sets

Made from chrome vanadium steel with a satin finish body and polished heads. 15 cranked open end. Bi-hexagonal and offset ring end. Sizes 6 - 32mm. Heads conform to DIN 3113

Metric Combination Spanner Set

Open Ended Spanners

Drop forged steel with 15° cranked open ends. Conform to ASME B107.9M : 1994.

Metric

Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

A/F

Metric

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Professional Open Ended Spanners

Manufactured from chrome vanadium steel with a highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance. Conform to ASME B107.9.

Metric

Tommy Bars (for Melco Box Spanners)

Available in 3 sizes.