产品 / 切削工具 / 钻孔加工
编号：SHR0242416A
●产品描述：
Sherwood Drill Blanks HSS
Jobber length blank hardened and ground all over. Accurately ground without back taper. Diameter Tolerance: h8. Manufactured to DIN 338.
Series J400
编号：SHR0251367K
●产品描述：
Sherwood Stub Drills HSS
General-purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118, Helix angle: Normal, Web thickness: standard, Relief angle: 10-20, Tolerance of diameter: h8, Tolerance of shank: f11. Manufactured to BS328:Part 1:1986/DIN338.
Series S100
编号：SHR1584620K
●产品描述：
Sherwood® Solid Carbide Drills
General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338.
J102 Solid Carbide Jobber Drills
编号：SHR0252748E
●产品描述：
Sherwood Drills Taper Shank HSS
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.
For all dimensional specifications please refer to our catalogue.
Series T100 (MT1) - Metric
编号：DOR0252708L
●产品描述：
Dormer Drills Taper Shank HSS
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.
For all dimensional specifications please refer to our catalogue.
Series A130 (MT1) - Metric
编号：KEN1583370K
●产品描述：
Kennedy® Stub Length Drills Carbide
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.
Tolerances:
Cutting Dia. plus 0.000mm - 0.015mm.
Shank Dia. plus 0.000mm - 0.030mm.
Kennedy® Carbide Stub Length Drills - Metric
编号：SHR0251273H
●产品描述：
Sherwood Stub Drills HSS
General-purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118, Helix angle: Normal, Web thickness: standard, Relief angle: 10-20, Tolerance of diameter: h8, Tolerance of shank: f11. Manufactured to BS328:Part 1:1986/DIN338.
Series S100
编号：DOR0267116B
●产品描述：
Dormer Stub Drills
A920 - HSCo PFX Stub Drills
High productivity "one-hit" drilling to 3xD. Excellent performance across a wide range of materials. Parabolic flute design promotes constant chip flow.Size Range: 1.0-20.0mm. Manufactured to BS 323, DIN1897, ansi.
A920 - HSCo PFX Stub Drills - metric
A920
Excellent for:
Carbon/alloy steels, stainless, titanium and nickel
Good for:
Cast iron, copper, aluminium and thermoplastics
编号：DOR0251633E
●产品描述：
Dormer Jobber Drills for Stainless Steel HSS
Drills up to 4 x diameter. Split point. Point angle: 135. Manufactured to BS328, DIN338.
Series A108 - Metric
编号：SHR0251794M
●产品描述：
Sherwood Reduced Shank Drills (Blacksmiths) - 1/2" Parallel Shank HSS
General-purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2". Point angle 118, helix angle: normal, web thickness: standard, tolerance of diameter: h8, tolerance of shank: -0.01/0.08. Manufactured to BS328. Fracturing of the drill shank may occur if it is used for any other purpose or if extreme pressure is exerted on the drill.
For all dimensional specifications please refer to our catalogue.
Inch
All sizes will fit into a 13mm/1/2" chuck.