产品 / 切削工具 / 钻孔加工
编号：SHR0242006S
●产品描述：
Sherwood Extra Length Drills Steam Tempered HSS
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 10-20, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.
For all dimensional specifications please refer to our catalogue.
Series E100 - Inch Sizes
编号：SHR1585410K
●产品描述：
Sherwood® Solid Carbide Drills
General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338.
J102 Solid Carbide Jobber Drills
编号：DOR0266453Z
●产品描述：
Dormer HSCO Jobber Drills
A901 HSCo PFX Alcrona Top Jobber Drill
High productivity "one-hit" drilling to 6xD
Alcrona Top coating for extended tool life.
Excellent performance across a wide range of materials.
Size Range: 1.5 - 16.0mm, 1/16” - 5/8”
A901 HSCO Jobber Drills Coated
A901
Excellent for: Carbon/alloy steels, stainless and cast iron
Good for: Titanium, nickel and copper
编号：SHR0250202P
●产品描述：
Sherwood Jobber Drills Steam Tempered HSS
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.
Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
Series J100
编号：SHR0251227H
●产品描述：
Sherwood Stub Drills HSS
General-purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118, Helix angle: Normal, Web thickness: standard, Relief angle: 10-20, Tolerance of diameter: h8, Tolerance of shank: f11. Manufactured to BS328:Part 1:1986/DIN338.
Series S100
编号：SHR1585130K
●产品描述：
Sherwood® Solid Carbide Drills
General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338.
J102 Solid Carbide Jobber Drills
编号：GUH0266501M
●产品描述：
Guhring Production Jobber Drills HSS-Co 5%
Rigid, high heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. TiN coated gives greater wear resistance and longer tool life. Limited suitability for special alloys such as Hastelloy, Inconel, Nimonic etc. Manufactured to DIN338.
Series 657 - Inch
编号：DOR0252087F
●产品描述：
Dormer Stub Drills
The A120 HSS stub drill from Dormer has a standard helix right hand spiral. The rigidity of these Dormer stub drill bits allow them to be used in portable drills, turret and automatic lathes.
Series A120 Stub Drill HSS - Metric
编号：SHR1586550K
●产品描述：
Sherwood® Solid Carbide Drills
General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338.
J102 Solid Carbide Jobber Drills
编号：SHR0250209X
●产品描述：
Sherwood Jobber Drills Steam Tempered HSS
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.
Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
Series J100