产品 / 切削工具 / 钻孔加工
品牌
11.50mm HEAVY DUTY COBALT L/SERIES DRILL

11.50mm HEAVY DUTY COBALT L/SERIES DRILL

编号:SWT1254115A
●产品描述:
SwissTech Long Series Heavy Duty Drills HSS-Co 8% Cobalt

Heavy-duty drill used for deep holes in steels with a tensile strength up to 1,400 N/mm2. Stainless steels, heat and acid-resistant steels and hard bronze. Point angle: 135. Helix angle: Normal. Web thickness: Strengthened. Relief angle: Normal. Tolerance of diameter: h8. Tolerance of shank: f11. Manufactured to DIN340/BS328.

For all dimensional specifications please refer to our catalogue.

Series 4000 - Metric

A1211 5.00mm S/S JOBBER DRILL

A1211 5.00mm S/S JOBBER DRILL

编号:TTX0251184Q
●产品描述:
Walter Titex Jobber Drills Steam Tempered HSS

Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.

Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

Series A1211

11.30mm HSS S/S JOBBER DRILL

11.30mm HSS S/S JOBBER DRILL

编号:SHR0250181R
●产品描述:
Sherwood Jobber Drills Steam Tempered HSS

Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.

Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

Series J100

3/32

3/32" HSS HARDENED/GROUND DRILL BLANK

编号:SHR0242360F
●产品描述:
Sherwood Drill Blanks HSS

Jobber length blank hardened and ground all over. Accurately ground without back taper. Diameter Tolerance: h8. Manufactured to DIN 338.

Series J400

4.90mm CARBIDE S/S JOBBER DRILL

4.90mm CARBIDE S/S JOBBER DRILL

编号:SHR1585490K
●产品描述:
Sherwood® Solid Carbide Drills

General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338.

J102 Solid Carbide Jobber Drills

11.00mm HSS-COBALT S/S DRILL TiN

11.00mm HSS-COBALT S/S DRILL TiN

编号:KEN0266200K
●产品描述:
Kennedy Drills for Stainless Steel HSS-Co 8% TiN Coated

Deep hole drill with high heat resistance to drill non alloyed and alloyed steels as well as long chipping materials with tensile strength up to 1,300N/mm2. Special point design with web thinning form S optimised chip breaking and reduced feed force and torque. Ample chip space enables drilling over five times diameter deep without pecking. TiN coating provides longer tool life or increased cutting speeds. Point angle: 130. Helix angle: High. Web thickness: Strengthened. Relief angle: Normal. Tolerance of diameter: h8. Tolerance of shank: f11. Manufactured to DIN338.

Drills for Stainless Steel HSS-Co 8% TiN Coated

5517 4.00mm CARBIDE SL JOBBER DRILL

5517 4.00mm CARBIDE SL JOBBER DRILL

编号:GUR1582512X
●产品描述:
Guhring Production Jobber Drills HSS-Co 5%

Solid Carbide Jobber drills are especially suitable for drilling cast steels, grey cast iron, chilled cast iron, austenitic manganese steels, bronzes, light metals and non-ferrous metals. Furthermore suitable for the economic machining of abrasive materials (AlSi-alloys), fibre-reinforced plastics and other Duroplastics liable to cause severe abrasion on cutting lips and lands.

Series 5517 - Metric

A920 5.00mm HSCO DHD HI/PERFORMANCE 3xD STUB DRILL

A920 5.00mm HSCO DHD HI/PERFORMANCE 3xD STUB DRILL

编号:DOR0267048C
●产品描述:
Dormer Stub Drills

A920 - HSCo PFX Stub Drills
High productivity "one-hit" drilling to 3xD. Excellent performance across a wide range of materials. Parabolic flute design promotes constant chip flow.Size Range: 1.0-20.0mm. Manufactured to BS 323, DIN1897, ansi.

A920 - HSCo PFX Stub Drills - metric

A920
Excellent for:
Carbon/alloy steels, stainless, titanium and nickel

Good for:
Cast iron, copper, aluminium and thermoplastics
40.00mm x 555mm O/A HSS TAPER SHANK DRILL

40.00mm x 555mm O/A HSS TAPER SHANK DRILL

编号:SHR0244048C
●产品描述:
Sherwood Extra Length Drills Taper Shank HSS

General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118, helix angle: normal, web thickness: standard, relief angle 8-20, tolerance of diameter: h8. Point angle to BS328 PTI 1986.

For all dimensional specifications please refer to our catalogue.

3 Morse Taper - Metric

Manufactured to DIN1870 Series 1
2.80mm CARBIDE S/S JOBBER DRILL

2.80mm CARBIDE S/S JOBBER DRILL

编号:SHR1585280K
●产品描述:
Sherwood® Solid Carbide Drills

General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338.

J102 Solid Carbide Jobber Drills