产品 / 切削工具 / 钻孔加工
编号：GUH0265096T
●产品描述：
Guhring Jobber Drills HSS TiN Coated
Standard drill for drilling steel and cast steel, alloyed and unalloyed grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Type N, BS328, DIN338RN.
Series 651 - Metric
编号：GUR1252616R
●产品描述：
HSS-Co 5% Production Jobber Drills
For multiple machining tasks. Suitable for non-ferrous metals, structural steels and carbon steels, high-alloyed steels, cast iron and cast alloys, plastics as well as aluminium.
Manufactured to BS 328, DIN338RN.
Series 5523
编号：GUH0250160T
●产品描述：
Guhring Jobber Drills HSS Steam Tempered
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.
Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
Series 205
编号：GUH0262028E
●产品描述：
Guhring GT50 Long Series Drills HSS
A special drill for drilling deep holes in soft materials and those producing long stringy swarf with a case hardness of 500N/mm2 such as mild steel, aluminium, aluminium alloys, zinc, refined copper and wood. Manufactured to DIN340.
For all dimensional specifications please refer to our catalogue.
Series 501 - Metric
编号：GUR1252684T
●产品描述：
Guhring Production Drills
Guhring No.5523 Jobber Drill HSS-Co have a tough cobalt substrate that delivers high performance at low cost to produce a general purpose drill for the machining of steel and cast steel (alloyed and unalloyed), , grey cast iron, malleable cast iron, spheroidal graphite iron, sintered iron and graphite with high concentricity characteristics.
No.5523 Jobber Drill HSS-Co
编号：GUR1252620W
●产品描述：
HSS-Co 5% Production Jobber Drills
For multiple machining tasks. Suitable for non-ferrous metals, structural steels and carbon steels, high-alloyed steels, cast iron and cast alloys, plastics as well as aluminium.
Manufactured to BS 328, DIN338RN.
Series 5523
编号：GUH0252698A
●产品描述：
Guhring Drills Taper Shank HSS
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.
For all dimensional specifications please refer to our catalogue.
Series 245 (MT1) - Metric
编号：GUH0264554E
●产品描述：
Guhring Production Jobber Drills HSS-Co 5%
Rigid, high-heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. Limited suitability for special alloys such as hastaloy, inconel, nimonic etc. Manufactured to DIN338.
Series 605 - Metric
编号：GUH0265080M
●产品描述：
Guhring Jobber Drills HSS TiN Coated
Standard drill for drilling steel and cast steel, alloyed and unalloyed grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Type N, BS328, DIN338RN.
Series 651 - Metric
编号：GUH0252746C
●产品描述：
Guhring Drills Taper Shank HSS
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.
For all dimensional specifications please refer to our catalogue.
Series 245 (MT1) - Metric