产品 / 切削工具 / 钻孔加工
编号：GUH0267035M
●产品描述：
Guhring Long Series Stub Drills HSS TiN Coated
For the drilling of deeper holes and for use with drill bushings. For machining alloyed and unalloyed steel, cast steel, cast iron, German silver and graphite. Type N. Manufactured to DIN340.
For all dimensional specifications please refer to our catalogue.
Series 667 - Metric
编号：GUR1252648D
●产品描述：
Guhring Production Drills
Guhring No.5523 Jobber Drill HSS-Co have a tough cobalt substrate that delivers high performance at low cost to produce a general purpose drill for the machining of steel and cast steel (alloyed and unalloyed), , grey cast iron, malleable cast iron, spheroidal graphite iron, sintered iron and graphite with high concentricity characteristics.
No.5523 Jobber Drill HSS-Co
编号：GUH0264410A
●产品描述：
Guhring NC Spotting Drills HSS
Special drill for accurate and fast slotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and chamfering of tapping holes in one operation. N.B. Only suitable for shallow depth drilling. Type N: Guhring standard, overall lengths to DIN1897. 90 Point.
For all dimensional specifications please refer to our catalogue.
Series 557 - 90 Degree
编号：GUH0263865M
●产品描述：
Guhring GT100 Jobber Drills HSS
HSS GT100 jobber drills. For drilling in difficult conditions when swarf congestion prevents an adequate flow of coolant. For use in steel and cast iron having a hardness of up to 1000N/mm2. Not recommended for nickel-chrome steels or similar material. Manufactured to BS 328/DIN 338.
Series 549 - Metric
编号：GUH0260670T
●产品描述：
Guhring Bushing Drills Taper Shank HSS
Standard drill for use with drill bushings and for deep hole drilling in alloyed and unalloyed steel and cast steel, grey cast iron, malleable cast iron, spheroidal cast iron, sintered powder metals, German silver and graphite. Type N DIN341.
For all dimensional specifications please refer to our catalogue.
Series 257 (MT1) - Metric
编号：GUH0263930H
●产品描述：
Guhring GT100 Jobber Drills HSS
HSS GT100 jobber drills. For drilling in difficult conditions when swarf congestion prevents an adequate flow of coolant. For use in steel and cast iron having a hardness of up to 1000N/mm2. Not recommended for nickel-chrome steels or similar material. Manufactured to BS 328/DIN 338.
Series 549 - Metric
编号：GUH0263907H
●产品描述：
Guhring GT100 Jobber Drills HSS
HSS GT100 jobber drills. For drilling in difficult conditions when swarf congestion prevents an adequate flow of coolant. For use in steel and cast iron having a hardness of up to 1000N/mm2. Not recommended for nickel-chrome steels or similar material. Manufactured to BS 328/DIN 338.
Series 549 - Metric
编号：GUH0263801T
●产品描述：
Guhring GT100 Jobber Drills HSS
HSS GT100 jobber drills. For drilling in difficult conditions when swarf congestion prevents an adequate flow of coolant. For use in steel and cast iron having a hardness of up to 1000N/mm2. Not recommended for nickel-chrome steels or similar material. Manufactured to BS 328/DIN 338.
Series 549 - Inch
编号：GUH0264550H
●产品描述：
Guhring Production Jobber Drills HSS-Co 5%
Rigid, high-heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. Limited suitability for special alloys such as hastaloy, inconel, nimonic etc. Manufactured to DIN338.
Series 605 - Metric
编号：GUH0264463J
●产品描述：
Guhring NC Spotting Drills HSS TiN Coated
Special drill for accurate and fast spotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and chamfering of tapping holes in one operation. N.B. Only suitable for shallow depth drilling. Type N: Guhring standard, overall lengths to DIN1897. TiN coated increases tool life or increased cutting speeds. 90 Point.
For all dimensional specifications please refer to our catalogue.
Series 568 - 90 Degree