产品 / 切削工具 / 钻孔加工
编号：GUH0266554M
●产品描述：
Guhring Production Jobber Drills HSS-Co 5%
Rigid, high heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. TiN coated gives greater wear resistance and longer tool life. Limited suitability for special alloys such as Hastelloy, Inconel, Nimonic etc. Manufactured to DIN338.
Series 657 - Metric
编号：GUR1582502B
●产品描述：
Guhring Production Jobber Drills HSS-Co 5%
Solid Carbide Jobber drills are especially suitable for drilling cast steels, grey cast iron, chilled cast iron, austenitic manganese steels, bronzes, light metals and non-ferrous metals. Furthermore suitable for the economic machining of abrasive materials (AlSi-alloys), fibre-reinforced plastics and other Duroplastics liable to cause severe abrasion on cutting lips and lands.
Series 5517 - Metric
编号：GUH0261271Y
●产品描述：
Guhring GV120 Heavy Duty Stub Drills HSS-Co
Manufactured to Type GV120 DIN1897.
Series 329
编号：GUR1252701N
●产品描述：
Guhring Production Drills
Guhring No.5523 Jobber Drill HSS-Co have a tough cobalt substrate that delivers high performance at low cost to produce a general purpose drill for the machining of steel and cast steel (alloyed and unalloyed), , grey cast iron, malleable cast iron, spheroidal graphite iron, sintered iron and graphite with high concentricity characteristics.
No.5523 Jobber Drill HSS-Co
编号：GUH0250046V
●产品描述：
Guhring Jobber Drills Steam Tempered HSS
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.
Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
Series 205
编号：GUH0260795F
●产品描述：
Guhring Bushing Drills Taper Shank HSS
Standard drill for use with drill bushings and for deep hole drilling in alloyed and unalloyed steel and cast steel, grey cast iron, malleable cast iron, spheroidal cast iron, sintered powder metals, German silver and graphite. Type N DIN341.
For all dimensional specifications please refer to our catalogue.
Series 257 (MT1) - Metric
编号：GUH0267033K
●产品描述：
Guhring Long Series Stub Drills HSS TiN Coated
For the drilling of deeper holes and for use with drill bushings. For machining alloyed and unalloyed steel, cast steel, cast iron, German silver and graphite. Type N. Manufactured to DIN340.
For all dimensional specifications please refer to our catalogue.
Series 667 - Metric
编号：GUH0266550V
●产品描述：
Guhring Production Jobber Drills HSS-Co 5%
Rigid, high heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. TiN coated gives greater wear resistance and longer tool life. Limited suitability for special alloys such as Hastelloy, Inconel, Nimonic etc. Manufactured to DIN338.
Series 657 - Metric
编号：GUR1582507G
●产品描述：
Guhring Production Jobber Drills HSS-Co 5%
Solid Carbide Jobber drills are especially suitable for drilling cast steels, grey cast iron, chilled cast iron, austenitic manganese steels, bronzes, light metals and non-ferrous metals. Furthermore suitable for the economic machining of abrasive materials (AlSi-alloys), fibre-reinforced plastics and other Duroplastics liable to cause severe abrasion on cutting lips and lands.
Series 5517 - Metric
编号：GUH0261388Q
●产品描述：
Guhring GV120 Heavy Duty Stub Drills HSS-Co
Manufactured to Type GV120 DIN1897.
Series 329