Cutting Compound

Ensures smooth and free cutting on pipe and bolt thread. Can be used on machine or hand dies, when tapping, sawing and drilling. Prevents dryness and torn threads, helps to extend tool life.

Sherwood® STD Tapping & Drilling Non-Soluble Foam Lubricant

Foam aerosol penetrates and is able to cling to normally inaccessible areas and moving cutting edges. Can be used on yellow metals without the risk of staining.

Sherwood® STD Tapping & Drilling Compound and Fluid

Sherwood® STD cutting compounds and fluids help cutting tools to cut smoothly and quickly. Sherwood STD forms a coating over the tool and work piece that will allow swarf and cut chips of metal to be removed with less friction which extends the working life of the tool. Less effort is therefore required to cut even the hardest metal, the surface finish of the cut is improved and cutting times are reduced.

Formulated to be suitable for all types of steel and ceramics, even high tensile steels. Due to the active nature of the product there is a risk of staining if the product is used on some yellow metals.

It will not mix with water.
It can be removed with all common industrial degreasers and solvent cleaners.
It is suitable for use on steel, stainless steel, alloys, heat resisting metals, cast iron, aluminum and ceramic.
The formulation will not break down under extreme pressures.


Typical applications:

Hacksawing.
Apply to the hacksaw blade before and during the sawing operation. Suitable for use with power saws and handsaws.

Threading.
Apply to the die or tap prior to use and also during the operation. Take care if applying to moving parts. Suitable for both machine and hand operations. It is particularly recommended for pipe work where the risk of thread wall deformation during cutting is greatly reduced.

Drilling.
Apply during the drilling operation. It will increase drilling efficiency and prolong drill bit life. Take care near moving parts.

STD Compound

Sherwood® STD Tapping & Drilling Compound has a low melting point paste maintains a continual lubricant feed to the cutting edge. Hand applied. Suitable for the most severe cutting operations.

Trefolex Cutting Compound

A green coloured, active cutting compound containing a colloid. It melts slowly as frictional heat is generated. It maintains efficient lubrication throughout operations such as pipe screwing, hack sawing, tapping, reaming, etc. It is suitable for all users of hand tools. Trefolex prolongs the life of the tool. It will not corrode steel nor affect aluminium. Although the surface of copper and brass is darkened, the metal suffers no detrimental effect. It is ideal for use with stainless steel.



500gm

Tapping & Drilling Lubricants

Concentrated metal working fluid containing a unique oil-soluble molybdenum compound with extreme pressure anti-weld additives.
Lubricates, reduces friction, heat and distortion of the work.
Aerosol version of MWF for ease of application.
Particularly effective on stainless steel and light alloys, which are prone to surface welding or pick-up on the tool

MWS High performance metalworking spray

LPS® Tapmatic TriCut Cutting Fluid

Features:
Excellent for stainless steel and other hard to machine metals
Not recommended for aluminum
Provides smooth, accurate cutting action
Flows directly to cutting edge
Extends tool life
Improves surface finish
Allows increased removal rates
Reduces friction
Suitable for high and low speed applications
Non-corrosive to steel

Cutting Compound

Ensures smooth and free cutting on pipe and bolt thread. Can be used on machine or hand dies, when tapping, sawing and drilling. Prevents dryness and torn threads, helps to extend tool life.

Trefolex Cutting Compound

A green coloured, active cutting compound containing a colloid. It melts slowly as frictional heat is generated. It maintains efficient lubrication throughout operations such as pipe screwing, hack sawing, tapping, reaming, etc. It is suitable for all users of hand tools. Trefolex prolongs the life of the tool. It will not corrode steel nor affect aluminium. Although the surface of copper and brass is darkened, the metal suffers no detrimental effect. It is ideal for use with stainless steel.

Tufcut Metal Cutting Lubricants

TUFCUT is a range of specialist metal cutting lubricants based on a mixture of lubricants, extreme pressure additives and anti-oxidants in a blend of solvents. The range has been formulated to offer instant, ready-to-use metal machining products to provide exceptional performance in demanding applications.

Dissipates heat and allows heavier close tolerance cuts.
Excellent resistance to extreme pressure prevents chip welding and extends tool life.
Handy pack sizes allows application direct to the cutting edge.
TUFCUT Liquid (bulk) can be used in automatic applicators.
Approved by Augusta Westland Helicopters for machining composite materials (TUFCUT Liquid).

TUFCUT offers outstanding performance for turning, drilling, reaming, tapping and thread cutting of tough metals such as stainless steel, high tensile, high speed and high carbon steels.

Particularly invaluable for: mould and dye makers, pattern formers, heavy engineering, plant manufacturers, metal fabricators, shipyard, docks and marine companies, metal parts manufacturers.

Tufcut Liquid - 5 Litre

Dissipates heat and allows heavier close tolerance cuts. Excellent resistance to extreme pressure prevents chip welding and extends tool life. Excellent results across a wide range of metals including stainless steel, high tensile steel, high speed and high carbon steels. Ideal for turning, drilling, reaming, tapping and thread cutting. Can be used in automatic applicators.
Size: 5ltr.

Tapping & Drilling Lubricants

Concentrated metal working fluid containing a unique oil-soluble molybdenum compound with extreme pressure anti-weld additives.
Lubricates, reduces friction, heat and distortion of the work.

MWF High performance metalworking fluid