产品 / 轴承 & 滚轴 / 传动轮
| 品牌 |
|
编号：OPB6951328F
●产品描述：
Taper Bore Bushes
Used to fit flywheels, pulleys and chain sprockets onto an electric motor shaft.
Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining.
To lock the shaft tighten up two grub screws,
to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft.
Material: EN-GJL 200/DIN EN 1561.
Metric Sizes
Keyways to DIN 6885 Part 1.
* Bores marked have shallow keyways.
编号：OPB6958273E
●产品描述：
V-Grooved Pulleys for Taper Bushes
Grooves to ISO/BS/DIN 2211.
Belt Section 10/Z (SPZ/10)
编号：OPB6951121Y
●产品描述：
Taper Bore Bushes
Used to fit flywheels, pulleys and chain sprockets onto an electric motor shaft.
Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining.
To lock the shaft tighten up two grub screws,
to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft.
Material: EN-GJL 200/DIN EN 1561.
Metric Sizes
Keyways to DIN 6885 Part 1.
* Bores marked have shallow keyways.
编号：OPB6958002C
●产品描述：
V-Grooved Pulleys for Taper Bushes
Grooves to ISO/BS/DIN 2211.
Belt Section 13/A (SPA/13)
编号：OPB6958165W
●产品描述：
V-Grooved Pulleys for Taper Bushes
Grooves to ISO/BS/DIN 2211.
Belt Section 17/B (SPB/17)
编号：OPB6951454J
●产品描述：
Taper Bore Bushes
Used to fit flywheels, pulleys and chain sprockets onto an electric motor shaft.
Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining.
To lock the shaft tighten up two grub screws,
to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft.
Material: EN-GJL 200/DIN EN 1561.
Metric Sizes
Keyways to DIN 6885 Part 1.
* Bores marked have shallow keyways.
编号：OPB6951451F
●产品描述：
Taper Bore Bushes
Used to fit flywheels, pulleys and chain sprockets onto an electric motor shaft.
Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining.
To lock the shaft tighten up two grub screws,
to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft.
Material: EN-GJL 200/DIN EN 1561.
Metric Sizes
Keyways to DIN 6885 Part 1.
* Bores marked have shallow keyways.
编号：OPB6958142W
●产品描述：
V-Grooved Pulleys for Taper Bushes
Grooves to ISO/BS/DIN 2211.
Belt Section 17/B (SPB/17)
编号：OPB6951458N
●产品描述：
Taper Bore Bushes
Used to fit flywheels, pulleys and chain sprockets onto an electric motor shaft.
Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining.
To lock the shaft tighten up two grub screws,
to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft.
Material: EN-GJL 200/DIN EN 1561.
Metric Sizes
Keyways to DIN 6885 Part 1.
* Bores marked have shallow keyways.
编号：OPB6951510L
●产品描述：
Taper Bore Bushes
Used to fit flywheels, pulleys and chain sprockets onto an electric motor shaft.
Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining.
To lock the shaft tighten up two grub screws,
to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft.
Material: EN-GJL 200/DIN EN 1561.
Inch Sizes
Keyways to BS 46 Part 1.