Ladies Food Coat

One Pocket with an inside chest pocket and concealed stud front. Length 105cm. Fabric: Fortis Plus 190g/m. White.

Chainmail Gloves

Made from 100% stainless steel. To protect against cuts from sharp objects in hazardous environments such as an abattoir/slaughterhouse. Plasma welded to produce a stronger more durable glove. Patented tension sprung steel mesh gives a comfortable and secure fit.

Pocket Tabbards

General purpose tabbard for use in kitchens, serveries etc.
195gsm 65% Polyester / 35% Cotton
Large patch pocket
Adjustable stud side tubs
Self fabric bound trim
Teflon coated
Available in a full range of sizes from Small to XX-Large.

Colours available:
Black Navy Red Royal Kelly* Yellow* White Bottle
*These colours are available up to size XL only.

SiteSafe® Disposable Workwear

SiteSafe® disposable single use aprons manufactured from low density polythene.
One size only 690x1070mm.
Supplied in packs of 100.

Available in a range of five colours:
Blue Order Code: SSF-962-1150B
Green Order Code: SSF-962-1150G
Red Order Code: SSF-962-1150R
White Order Code: SSF-962-1150W
Yellow Order Code: SSF-962-1150Y

Disposable Polythene Aprons

Chainmail Gloves

Made from 100% stainless steel. To protect against cuts from sharp objects in hazardous environments such as an abattoir/slaughterhouse. Plasma welded to produce a stronger more durable glove. Patented tension sprung steel mesh gives a comfortable and secure fit.

Bib Aprons

Poly-cotton bib style aprons for general use in kitchens, serveries and workshops. Without pocket.
195gsm 65% Polyester / 35% Cotton
Black cotton ties
Teflon Coated
One size only: Width 28"/27cm x Length 36"/92cm

Colours Available:
Black, Navy, Red, Royal, Kelly, Yellow, White, Bottle.

Chemical Resistant Special Hazard Clothing

Chemsol jacket and trousers are manufactured from high tear and abrasion resistant Elastomised PVC on a polyester base to give stretch comfort and chemical resistant properties to provide a high degree of safety for those handling dangerous chemicals. The jacket has a zip front fastening with velcro closure storm facing and hood with draw strings. The trousers have an elasticated waist and a long back length for additional protection. All seams are stitched and high frequency welded.

Both garments are CE marked as category III - PPE and conform to BS EN 467, providing chemical protection to parts of the body.

CSTE Chemical Resistant Trousers

Colour: Green

For the full range of workwear please refer to our catalogue.

Tyvek Pro.Tech Coveralls

Tychem 'F' provides an even greater barrier against aggressive chemicals, toxic substances, gases and most organic chemicals. Manufactured to meet the seam-tightness requirements and whole-suit tests defined by the new European standards for Chemical Protective Clothing of Types 3 and 4.
Tyvek 'F' is a high performance barrier material.
It is produced by laminating TYVEK to a barrier film which is coated by a polymer. The combination of the film and the polymer provide a particle-tight material with good resistance to penetration and permeation by many liquids and gases.
Provides even higher protection. Flexible and lightweight yet strong. Stitched and taped seams. 100% protection against hazardous dust and powders. Outstanding protection against organic and inorganic acids and bases, many commonly used gases, most organic solvents, blood and blood-borne pathogens and certain chemical in aerosol and spray form. Anti-statically treated (inside surface).

Type 'F' Hooded

Flame Retardant Boiler Suit

These Portwest coveralls are manufactured from Bizweld which is a heavyweight 100% cotton fabric that has been specially treated with a flame retardant finish. Typical uses: welding, cutting, grinding, electrical on-shore and off-shore oil and gas industries, automotive, public utilities etc.

Side pockets with access.
Stud front.
Rule pocket.
Resilient for over 50 washes
Certified En470-1, EN531: A1, B1, C1 and EN533.

BIZ1

Chemical Resistant Special Hazard Clothing

The CMBH Chemmaster coverall with hood a well established and proven range of chemical protective clothing. Manufactured from PVC coated Nylon with a weight of 380 g/m2. All garments have frequency welded and sewn seams. A practical, robust and economical solution for chemical protection.

Chemical resistance to BS EN465:1995 Type 4 and BS EN466:1995 Type 3.

CMBH Coverall with Hood

Colour: Green

For the full range of workwear please refer to our catalogue.