Dupont Coveralls

ProShield® FR is a hooded protective coverall made from a flame-retardant polypropylene non-woven fabric that provides limited protection against heat, flames and chemicals.

It is typically used, depending on chemical toxicity and exposure levels, for protection against particles (Type 5), limited liquid splashes or sprays of non-flammable liquids (Type 6) in applications where PPE offering chemical protection in addition to heat and flame protection is required.

Proshield Flame Retardant Coveralls

Body Protectors - Proshield 10

Garment description and features: Nylon zipper front with zipper flap, attached hood, elastic at hood, wrists, back waist and ankles. Exceeds minimum size requirements for North America and Europe; Set sleeve design with underarm gussets (extra fabric) allows greater arm movement. Unique design zips over neck to above the chin, eliminating exposed neck areas. Serged seams.
CE Type 5 & 6 for noxious dust and splash. Fabric description: SMMS material. Ideal for dry particulate barrier and repellency. Lightweight, and breathable. Improved strength, splash and particulate resistance in comparison to many traditional SMS products. Anti-static treated.

"Guard Master" Disposable Hooded Coveralls

Type 5/6 coveralls. Disposable coveralls with hood, elastic cuffs, back and ankles. 1-way zip at front with 1-ply stormflap. Made from 55gsm SMS (spunbond, microporous, spunbond) material with inside stitching. For noxious dust and splash. Ideal for dry particulate barrier and repellency. Lightweight and breathable. Liquid repellent. Designed to zip over neck to above the chin to protect exposed neck areas.
EN13034 for limited protection against liquid particles (type 6).
EN13982-1 (type 5) for protection against solid particles.
Comes in blue or white.
Available in five sizes from small to XXL.

Protective Coverall 4565

The 3M® 4565 Protective Coveralls use a unique blend of fabrics, designed to not only reduce the weight of the coverall, enhance the softness and drape over the body, but significantly improve the chemical permeation performance. They are made with taped seams for increased protection against fine particles and liquid chemical sprays. They have been tested to EN 14126 for biological protection against infective agents (see datasheet for class details). The 3M® 4565 Protective Coveralls also come with a new 3-piece hood for improved manoeuvrability with 3M full-face piece respirators and goggles and benefit from additional comfort and convenience features including knitted cuffs and a two-way zip with a resealable storm-flap.

Type 4565

Made with taped seams for increased protection against fine particles and liquid chemical sprays . Tested to EN 14126 for biological protection against infective agents. Features including knitted cuffs and a two-way zip with a resealable storm-flap.
Available in white with red seams (CE Type 4/5/6).

SiteSafe® Disposable Workwear

The SiteSafe® disposable bouffant will completely cover your hair, made from soft and lightweight polypropylene with an stitched elasticised edge.
One size fits all.
Supplied pack of 100.

Available in:
White Order Code: SSF-962-1260W
Blue Order Code: SSF-962-1260B

Bouffant Caps

SiteSafe® Disposable Workwear

SiteSafe® disposable single use aprons manufactured from low density polythene.
One size only 690x1070mm.
Supplied in packs of 100.

Available in a range of five colours:
Blue Order Code: SSF-962-1150B
Green Order Code: SSF-962-1150G
Red Order Code: SSF-962-1150R
White Order Code: SSF-962-1150W
Yellow Order Code: SSF-962-1150Y

Disposable Polythene Aprons

Chemical Resistant Special Hazard Clothing

Chemsol jacket and trousers are manufactured from high tear and abrasion resistant Elastomised PVC on a polyester base to give stretch comfort and chemical resistant properties to provide a high degree of safety for those handling dangerous chemicals. The jacket has a zip front fastening with velcro closure storm facing and hood with draw strings. The trousers have an elasticated waist and a long back length for additional protection. All seams are stitched and high frequency welded.

Both garments are CE marked as category III - PPE and conform to BS EN 467, providing chemical protection to parts of the body.

CSTE Chemical Resistant Trousers

Colour: Green

For the full range of workwear please refer to our catalogue.

"Guard Master" Disposable Hooded Coveralls

Type 5/6 coveralls. Disposable coveralls with hood, elastic cuffs, back and ankles. 1-way zip at front with 1-ply stormflap. Made from 55gsm SMS (spunbond, microporous, spunbond) material with inside stitching. For noxious dust and splash. Ideal for dry particulate barrier and repellency. Lightweight and breathable. Liquid repellent. Designed to zip over neck to above the chin to protect exposed neck areas.
EN13034 for limited protection against liquid particles (type 6).
EN13982-1 (type 5) for protection against solid particles.
Comes in blue or white.
Available in five sizes from small to XXL.

Kleenguard A40 Liquid & Particle Protection Coveralls

The A40 Kleenguard coveralls are suitable for process critical productions such as pharmaceutical industries, manufacturing, utilities, electronics, agriculture and paint spraying. They provide protection against chemical splash and particles. Over 35% stronger than the market leading product.

Welders Caps

Comfortable, durable and washable welders caps. Double stitched construction with absorbent cotton sweat band. Can be worn with the peak to the rear when a screen is used. New improved version with taped, reinforced internal seams for extra durability and improved comfort.

Welders Cap