Kennedy® Taper Punches

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.

Kennedy® Extra Length Insert Pin Punch Set

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

Extra Length Insert Pin Punch Set

Supplied in plastic wallet.
Contents:
(Diameter x Insert Length x Overall Length)
2x37x140, 3x51x153, 4x60x183, 5x70x200, 6x80x210 & 8x90x220mm.

Pin Punch Sets

Manufactured from hardened and tempered steel with a knurled grip. Suitable for use in the machine shop or the automotive industry to drive tight fitting pins out of mechanical assemblies or to realign holes to fit dowel pins.



Contents: 1x 3, 5, 6, 8 and 9.5mm.

Kennedy® Automatic Centre Punch

Strength of punch and depth of depression is adjustable by turning the knurled head. Delivers a punch between 6.3 to 22.5kg (14 to 50lb).

Heavy Duty

Kennedy® Nail Punches

Cupped and bevelled precision ground points provide accurate positioning over the nail head for efficient depression. Manufactured from hardened and tempered steel, with a knurled body for extra grip. Conform to BS3066. (Hardness: Heads 42 HRC Max: Points 52-58 HRC).

100mm (4") Overall Length

Pin Punches

Manufactured from hardened and tempered steel with a knurled grip. Suitable for use in the machine shop or the automotive industry to drive tight fitting pins out of mechanical assemblies or to realign holes to fit dowel pins.

100mm (4") - Overall Length

Kennedy® Inserted Pin Punches

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

Standard Length

Kennedy® Square Head Centre Punches

Non-roll. Manufactured from hardened and tempered steel with a knurled body for positive grip. Precision ground 60° point for accurate marking of workpiece. Conform to BS3066.

100mm (4") Overall Length

Parallel Pin Punch Set

All made from high quality carbon steel with the points hardened and tempered. With knurled body.



Designed for removing pins and dowels. Overall length: 150mm (6"). Contents: 1x 1.7, 2.3, 3.1, 3.9, 4.7, 5.3, 6.1, 7.6 and 9.5mm.

Pin Punches

Manufactured from hardened and tempered steel with a knurled grip. Suitable for use in the machine shop or the automotive industry to drive tight fitting pins out of mechanical assemblies or to realign holes to fit dowel pins.

100mm (4") - Overall Length