Battery-Powered Digital Pressure Gauge

The preferred Engineers 'Pressure Test Instrument'. One Instrument covers all Pressure Test requirements. Suitable for Hydraulics, Pneumatics, Water.

MAN-SD105

74mm Diameter
(Glass Fibre Reinforced PA)
Stainless Steel Process
Connection 1/4 " BSP Male
Ceramic Internal
Pressure Sensor
12.7mm 4-Segment
LCD Display
Powered by
9V Battery (supplied)
Range: -1 BAR
Vacuum & up
to 600 BAR
Accuracy
Class: /-0.5% FSD

Wall Mounted Hygrometer

Measures the percentage of humidity by comparing wet and dry temperatures. A reading of humidity is reached by the use of two hygrometers, one "dry"the other "wet". An accurate reading of humidity is reached by comparing readings to the enclosed chart. Suitable for use in offices, computer rooms, grain stores, green houses and where a constant humidity measurement is necessary. Moulded plastic casing, spirit filled.



Size 300 x 72mm. Range: -5C to 50C. 20F to 120F

Factory Act Thermometers

Moulded plastic casing with fixture holes. Spirit filled. All factory act thermometers have 16C, 60F clearly marked to comply with health and safety laws.

75/957/0

Range: -10C to 50C, 20F to 120F

YF-20 Sound Level Meter

Used for testing noise levels in almost any environment including factories, offices and homes. Range: 40 to 120dB. Features include: Double analogue scale, battery self-test, single switch operation and can be user calibrated. Supplied with carry case and 9V battery.

Twin Thermometer & Humidity Dials

For the measurement of Humidity up to 100%. Dials fitted into a plastic moulded casing. Lightweight and can be easily fixed to most surfaces. Adhesive pad (supplied).



Diameter 55mm. Range: -30C to 60C. 0F to 100F

Maximum - Minimum Thermometers

Moulded plastic wall mounting thermometers. Highest and lowest temperatures are recorded by markers. Re-set by depressing the button.

75/950/0

Size 200 x 65mm. Range: -40C to 50C, -40F to 120F

Dial Thermometers

Manufactured from stainless steel. Clips onto pipes with the aid of a spring, measuring temperatures from the back of the dial.

Clip On

Diameter 66mm. Range: 0C to 120C, 30F to 250F

Laboratory Thermometer

Featuring a toughened stirring bulb and permanent "Duramark" vertical figuring. Spirit filled. All thermometers are fitted with a non roll collar. Supplied in Safe Seal packs designed to cushion impact in the event of dropping.



Spirit

Plastic Wall Thermometer

Moulded plastic with fixture hole for hanging. Spirit filled.

75/952/0

Size 215 x 40mm. Range: -20C to 50C. 0F to 120F

Battery-Powered Digital Pressure Gauge

The preferred Engineers 'Pressure Test Instrument'. One Instrument covers all Pressure Test requirements. Suitable for Hydraulics, Pneumatics, Water.

MAN-SD105

74mm Diameter
(Glass Fibre Reinforced PA)
Stainless Steel Process
Connection 1/4 " BSP Male
Ceramic Internal
Pressure Sensor
12.7mm 4-Segment
LCD Display
Powered by
9V Battery (supplied)
Range: -1 BAR
Vacuum & up
to 600 BAR
Accuracy
Class: /-0.5% FSD