Factory Act Thermometers

Moulded plastic casing with fixture holes. Spirit filled. All factory act thermometers have 16C, 60F clearly marked to comply with health and safety laws.

75/955/0

Range: -10C to 50C, 20F to 120F

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

MET060 5-in-1 Digital Multimeter and Environmental Tester

Ideal for electrical troubleshooting & straightforward environmental testing in residential & commercial environments.

The 5-in-1 digital multimeter is capable of testing the
following;
- Electrical testing.
- Temperature from -20° to 1000°C.
- Humidity from 30 to 90%.
- Sound level from 35 to 100db.
- Illumination from 4000 to 40000 Lux.

AC/DC voltage up to 600V.
AC/DC current up to 10A.
Resistance up to 40MW.
Capacitance up to 200mF.
Frequency from 1Hz to 200KHz.
Relative measurement function.
Diode testing facility.
Clear display with LED back light & data hold function.
Auto power OFF & low power indicator.
Digital display count up to 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.

Pack includes:
- Environment digital multimeter
- Test probes
- Clamp-on test leads
- Temperature sensor probe
- 9V battery (installed)
- Instruction manual

Product Dimensions: 165(W) x 65(D) x 230(H) mm
618g Gross Weight

Heavy Duty Test Thermometer

Supplied in a aluminium case. Features a pocket clip and hanging loop. Spirit filled.

Maximum - Minimum Thermometers

Moulded plastic wall mounting thermometers. Highest and lowest temperatures are recorded by markers. Re-set by depressing the button.

75/951/0

Size 200 x 65mm. Range: -40C to 50C, -40F to 120F

Digital Manometer

Manufactured from high impact ABS combined with, high quality electronics and piezoresistive relative pressure sensors.

HND-P126

Suitable for Air and Non-Corrosive, Non Ionising Gases and Liquids
Pressure Units:- mbar, Pa, KPa, Mpa, mm/HG, PSI, m
Storage Min/Max -Values, Hold Function, Zero Point Adjustment, Tare Function
2x 4 1/2 -Digit LCD Display (12.4 & 7mm High)
Measuring Range: -100 to 2000mbar (-2000... +2000mbar)
Resolution: 1 mbar
Overload: 4 BAR Absolute
+/- 0.2% FS Accuracy
(+/- 0.4% FS Temperature Influence from 0 to 50 Degrees C)
9V Battery (supplied)

Laboratory Thermometer

Featuring a toughened stirring bulb and permanent "Duramark" vertical figuring. Spirit filled. All thermometers are fitted with a non roll collar. Supplied in Safe Seal packs designed to cushion impact in the event of dropping.



Spirit

Battery-Powered Digital Pressure Gauge

The preferred Engineers 'Pressure Test Instrument'. One Instrument covers all Pressure Test requirements. Suitable for Hydraulics, Pneumatics, Water.

MAN-SD105

74mm Diameter
(Glass Fibre Reinforced PA)
Stainless Steel Process
Connection 1/4 " BSP Male
Ceramic Internal
Pressure Sensor
12.7mm 4-Segment
LCD Display
Powered by
9V Battery (supplied)
Range: -1 BAR
Vacuum & up
to 600 BAR
Accuracy
Class: /-0.5% FSD

Factory Act Thermometers

Moulded plastic casing with fixture holes. Spirit filled. All factory act thermometers have 16C, 60F clearly marked to comply with health and safety laws.

75/957/0

Range: -10C to 50C, 20F to 120F

Amprobe TMA10A Airflow, Velocity and Temperature Meter

Ideal for HVAC/R technicians, electricians, research, industrial process and quality control. Input the surface area for accurate air flow measurements. Precise thermistor for temperature. Continuous moving average results for up to two hours. MIN/MAX/AVG readings. Air velocity average for eight multiple points. Data hold. Deluxe case.

Display: Dual 4-digit (9999 count) LCD.
Measurement ranges: 0.40 to 25.00m/s.
Resolution: 0.01m/s.
Dimensions: 181 x 71 x 38mm.
Weight: 363g.

YF-20 Sound Level Meter

Used for testing noise levels in almost any environment including factories, offices and homes. Range: 40 to 120dB. Features include: Double analogue scale, battery self-test, single switch operation and can be user calibrated. Supplied with carry case and 9V battery.