Kennedy® Lever Switchable 2 Mag Mini Elbow Joint Stand

Compact in design, this stand still has a magnetic pull of 40kg with positive switching, fully adjustable joints and slotted 'V' groove.

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Light Duty Fitment - Plain

Fitted as standard to KEN-333-2010K.
Column: 6.3mm x 120mm.
Threaded: M6 x 1mm.

Magnetic Bases

Lever type 2 magnetic faces and large vee. Universal clamp. Mounts: 1/4 I/D lug. Stem/spigot diameters: 1/8", 1/4", 5/16" & 3/8".

Fine Adjustment 2 Mag Stand

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Spare Knuckle Assemblies

For fitting between columns and mounting spigots. Simple Type.

Kennedy® Surface Gauges

Used for marking out lines parallel to a true edge or groove, and also to mark the centre of round bars. Machined base, two pillars, a double ended scriber and an adjustable attachment for holding scribers up to 1/4" diameter on to the pillar. The base has a machined V groove for use on pipes and round bar and two frictionally held pins which are used as a guide when sliding along the true edge or groove. The angle of the pillar can be finely adjusted with the use of a knurled thumb screw. Supplied with 2 pillars. Base dimensions: 4300K: 75 x 58mm. 4320K: 105 x 85mm.

Kennedy® Mag Stands

Fitted as standard to KEN-333-2080K & -2100K. 4 magnetic faces, bottom, sides and 45° angle face for curved surfaces.
Threaded: M8 x 1.25mm.
Magnetic pull: 30kg.

Push Button Base - 30kg

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Heavy Duty Fitment - Fine Adjusting

Fitted as standard to KEN-333-2060K & KEN-333-2050K. To suit 1/4" I/D lug, stem/spigot diameter 1/8", 1/4", 5/16" and 3/8".
Column: 12mm x 175mm.
Cross Bar: 10mm x 165mm with fine adjustment.
Threaded: M8 x 1.25mm.

Kennedy® Mag Stands

With four magnetic faces (one at 45°). Medium duty with standard clamp.
Mounts: 1/4" I/D lug, stem/spigot diameter: 5/16".
Base dimensions: 50 x 50 x 76mm.
Column height x diameter: 185 x 12mm.
Crossbar length x diameter: 150 x 6.3mm.
Magnetic pull: 30kg.
Overall height: 273mm.

Compact 4 Mag Stand

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Spare Knuckle Assemblies

For fitting between columns and mounting spigots. Simple Type.

Kennedy® Mag Stands

Fitted as standard to KEN-333-2030K, -2050K & -2110K. 4 magnetic faces, bottom and back face. Large vee for curved surfaces.
Threaded: M8 x 1.25mm.
Base dimensions: 60 x 50 x 55mm.
Magnetic pull: 50kg.

Lever Type Base - 50kg