Kennedy® Mag Stands

Fitted as standard to KEN-333-2080K & -2100K. 4 magnetic faces, bottom, sides and 45° angle face for curved surfaces.
Threaded: M8 x 1.25mm.
Magnetic pull: 30kg.

Push Button Base - 30kg

Kennedy® Surface Gauges

Used for marking out lines parallel to a true edge or groove, and also to mark the centre of round bars. Machined base, two pillars, a double ended scriber and an adjustable attachment for holding scribers up to 1/4" diameter on to the pillar. The base has a machined V groove for use on pipes and round bar and two frictionally held pins which are used as a guide when sliding along the true edge or groove. The angle of the pillar can be finely adjusted with the use of a knurled thumb screw. Supplied with 2 pillars. Base dimensions: 4300K: 75 x 58mm. 4320K: 105 x 85mm.

Kennedy® Mag Stands

With four magnetic faces (one at 45°). Heavy duty with universal clamp and fine adjustment.
Mounts: 1/4" I/D lug, stem/spigot diameter: 1/8", 1/4".
Base dimensions: 64 x 64 x 76mm.
Column height x diameter: 175 x 12mm.
Crossbar length x diameter: 165mm x 10mm.
Magnetic pull: 80kg.
Overall height: 280mm.

Fine Adjusting 4 Mag Stand

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Crossbar Assembly

With lug adaptor, 1/4" I/D lug. Accepts 1/8” and 1/4” spigot. To fit 10mm bar.

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Light Duty Fitment - Plain

Fitted as standard to KEN-333-2010K.
Column: 6.3mm x 120mm.
Threaded: M6 x 1mm.

Kennedy® Mag Stands

With four magnetic faces, one at 45°. Heavy duty with universal clamp.
Mounts: 1/4" I/D lug, stem/spigot diameter: 1/8", 5/16" & 3/8".
Base dimensions: 48 x 40 x 50mm.
Column height x diameter: 175mm x 12mm.
Crossbar length x diameter: 165 x 10mm.
Magnetic pull: 30kg.
Overall height: 227mm.

Universal 4 Mag Stand

Kennedy® Magnetic Stands

Kennedy® magnetic bases and comparator stands provide a stable platform to securely mount dial test indicators (DTI) to when measuring or checking tolerances or a machinists' scribe can be held when making out components. The powerful magnets in the base allow it to be clamped in position, exactly where you require it.

Switchable Universal Magnetic Stand with Two Magnetic Faces

The Kennedy® switchable universal magnetic stand has two high strength magnetic faces one with a large vee to allow it to be position and fastened to curved surfaces. The clamps can be set at any position along the column and cross bar allowing the DTI to be positioned exactly where you require it.

Clamping mounts: 1/4" I/D lug. stem/spigot diameter: 1/8", 1/4", 5/16", 3/8".
Base diameter: 60x50x55mm.
Column height x diameter: 175x12mm.
Crossbar length x diameter: 165x10mm.
Magnetic pull: 50kg.

Kennedy® Lever Switchable 2 Mag Large Elbow Stand

This large stand still has two powerful magnetic faces producing a magnetic pull of 80kg. It has positive switching, fully adjustable joints and slotted 'V' groovefor versatility.

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Spare Knuckle Assemblies

For fitting between columns and mounting spigots. Simple Type.

Kennedy® Magnetic Stand Fitments

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Crossbar Assembly

With lug adaptor, 1/4" I/D lug. Accepts 4, 8 and 10mm spigot. To fit 10mm bar.