Square Drive Torque Wrench

In engineering the new TruTorque range we have paid close attention to accuracy, ease of setting and comfort in use.

Durability has been a primary development goal - both in terms of the lifetime of components and longevity of calibration accuracy. Cycle testing of wrenches at full torque was a key element of the development process and, in total, several million tightening cycles were accumulated. The result is a product that you can use with complete confidence that you have the best tool for the job.



* Accuracy: +/-3% of reading exceeds all international standards for torque wrenches. Each wrench is supplied with a traceable calibration certificate.
* Micrometer Scale for simple and error free setting. (On dual scale wrenches, the micrometer increment applies to the N.m scale.)
* Quick and Light Adjustment: adjustment over the entire scale can quickly be achieved and with minimal effort in approximately ten complete turns (exact number varies by model).
* Versatile Ratchets: the tough ratchets are reversible and have narrow engagement angles of 5° to allow easy positioning of the tool in the tight confines of today's vehicles and machines.
* Comfortable, Durable Handle: the handle is constructed using two materials; a base material for strength overlaid with a soft feel grip for comfort and slip resistance.
* Adjustment Lock: all models feature a lock to prevent accidental adjustment of the set torque.

Kennedy Torque Wrenches

Kennedy 3/8?? square drive fixed head torque wrenches have a high quality chrome plated, polished steel head and retractable torque setting lever. A CLICK & SNAP? action indicates when the pre-set torque level has been reached.

Four easy read scales N.m, kgf.m, lbf.in x10, lbf.ft. Push through square drive connector to instantly reverse action. Knurled grip plastic handle.

Complete with factory tested calibration certificate, operating instructions and torque conversion chart. Supplied in blow moulded cases, except FTW800, which is in a cardboard case.

Manufactured to ISO 6789: 1992 (BS EN 26789: 1994).
Accuracy: plus/minus 4%.

3/8?? Square Drive Fixed Head Torque Wrenches

16mm Spigot End Fittings

Inch

Open End

Nut Spinners

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles 6?? (150mm), combined socket and blade length. Overall length: 230mm.

Metric

22mm Spigot End Fittings

Metric

Ring End

16mm Spigot End Fittings

Metric

Flare End

16mm Spigot End Fittings

Metric

Open End

16mm Spigot End Fittings

Inch

Open End

Q-Torq Torque Calibration Analysers

Clear easy to use scales. Specifically designed to set and calibrate most makes of torque tools. Mechanism is totally enclosed in a die cast aluminium housing. Repeatable accuracy to plus/minus 2% of reading. Memory pointer and built-in needle shock absorber. Single direction mechanism for clockwise use. The preferred and certified ranges of these torque calibration analysers meet the specified measuring range as detailed in ISO 6789 : 2003.

QCA 2500

Features:
Torque range: ISO 5.0 - 25Nm (44-220lbf.in).
Scale sub divisions: 0.5Nm/5lbf.in.
Versatile, can be used with torque screwdrivers and small torque wrenches.
Easy to use, clear & easy to read dual scale dial.
Enclosed mechanism designed for bench mounting.
Calibration certificate supplied.
New robust and modern design includes angled dial for ease of use.
Repeatability accuracy plus/minus 2% of reading.
Slave pointer tracks torque, while limit pointers can be used to mark pre-set limits.
Reversible drive adaptors provide two drive options - 1/4" hex female or 1/4" square male.
Dual Scale ISO metric & imperial ranges.
Spindle lock eliminates the need to remove tool from the drive during tool adjustment.
Input drive has an in-built shock absorber to protect the Torque Calibration Analyser from tool kick back.

16mm Spigot End Fittings

Metric

Open End