Kennedy® Precision Vernier Calipers

Give outside, inside, depth and step readings. Fine adjustment feature. 14° Vernier face angle reduces parallax. Incorporating Quadri feature.

Dial Calipers

Rack covers prevent dust from fouling teeth of racks. All measuring faces are precision ground and micro lapped for absolute internal, external, depth and step readings. Manufactured to DIN 862.

Heavy Duty Vernier Caliper

Thumb wheel and locknut with fine adjustment. Round measuring faces for accurate ID measurement. Satin chrome finish with clear easy read graduations.

Series 160

Metric & Imperial Reading Graduation: 0.02mm/0.001"

Standard Vernier Caliper

14 Vernier face angle provides easy reading. Thumbwheel and locknut. Incorporates Quadri feature.

Series 530

Dial Calipers

Easy read dial suitable for use where a scale would be difficult to read. Satin chrome finish. Incorporates quadri feature.

Series 505

Dial Calipers - Plastic

Manufactured from glass reinforced material. /-0.1mm//-0.004" accuracy.

300mm Vernier Depth Gauge

Series 527
Vernier depth gauges with fine adjustment feature. Base and measuring faces are made of stainless steel which has been hardened and microlapped.

Range: 0 - 150mm, 0 - 300mm.
Resolution: 0.02mm.



150mm vernier depth gauge with fine adjustment feature. Base and measuring faces are made of stainless steel which has been hardened and microlapped.
527-103: Range: 0-300mm. Resolution: 0.02mm.

Fine Adjustment Type

Fine adjustment allows improved sensitivity of slider movement. 14 vernier face angle. Incorporates Quadri feature. Satin chrome finish with clear easy read graduations.

Series 532

Metric & Imperial Reading - Graduation: 0.02mm/0.001"

Knife Edge Vernier Calipers

Give 4 types of reading, internal, external, depth and step. Dual reading scale (metric and inch) with 14 bevelled vernier scale for reduced parallax reading error, fine adjustment assembly and knurled locking nut. Manufactured from hardened stainless steel for rigidity with satin finish. Conform to DIN 862. For quick accurate setting of all three axes (X, Y, Z) by analogue differential indicator. Suitable for all machine tools with CNC, NC, DRO and also for EDM/spark erosion tools. Universal - one tool measures length, height, diameter and centre. No calculations and no 'trial and error' involved. Increses production and efficiency, reduces job time and operator requirement. Pre-adjusted to a concentricity of 0.01mm maximum.
Indicator diameter: 50mm.
Clamping shank diameter: 20mm.

Spring Loaded Vernier Caliper

Clear graduations on satin chrome finish. 14 measuring face angle for easy reading. Spring loaded Thumb lock. Incorporates Quadri feature.
Jaw length:50mm.
Measuring range: 0-200mm/0-8`.
Accuracy:0.03mm/0.00015`.

531-129