Bahco Hacksaw Blades

Bahco Sandflex bi-metal saw blades material make-up, combines the best characteristics of the tough spring steel and the wear-resistant high-speed steel. The two materials are electron-beam welded together, the teeth are then formed out of the high-speed steel to produce a perfect match with the flexible and virtually unbreakable spring steel as the backing material. Precision ground teeth produce an extremely powerful bite, this material technology gives Sandflex saws optimum cutting characteristics, long life and superior cutting capacity. Sandflex is the natural choice where economy, safety and performance are required.

Sandflex? Hacksaw Blades Type 3906

Kennedy Industrial Power/Machine Saw Blades

10 - 14 Teeth Per Inch. Recommended for cutting small cross sections and hard stock. This is the most popular choice for machine shops that are cutting a wide variety of materials.

HSS All Hard Powersaw Blades

Suitable for Section Width 8 to 25mm (5/16" to 1)

Kennedy Industrial Power/Machine Saw Blades

6 Teeth Per Inch. Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.

HSS All Hard Powersaw Blades

Suitable for Section Width 13 to 38mm (1/2" to 1,1/2")

Bahco Hacksaw Blades

Bahco Sandflex bi-metal saw blades material make-up, combines the best characteristics of the tough spring steel and the wear-resistant high-speed steel. The two materials are electron-beam welded together, the teeth are then formed out of the high-speed steel to produce a perfect match with the flexible and virtually unbreakable spring steel as the backing material. Precision ground teeth produce an extremely powerful bite, this material technology gives Sandflex saws optimum cutting characteristics, long life and superior cutting capacity. Sandflex is the natural choice where economy, safety and performance are required.

Sandflex? Hacksaw Blades Type 3906

Kennedy Industrial Power/Machine Saw Blades

6 Teeth Per Inch. Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.

HSS All Hard Powersaw Blades

Suitable for Section Width 13 to 38mm (1/2" to 1,1/2")

Eclipse Plus 30 Hand Hacksaw Blades All Hard HSS

Rigid all hard ground blade for straight cuts every time, the workpiece must be securely held in a clamp or vice.

Starrett Hand Hacksaw Blades

Starrett Bi-Metal Unique? safe flex blades are manufactured using a patented solid state diffusion process to produce industry?s most advanced bi metal hacksaw blade. Starrett Bi-Metal Unique? hacksaw blades have a massive increase in tooth strength and reduction in breakage and fracture when compared against traditional bi metal blades. Excellent for interrupted cuts in cramped places or where the blade is subject to bending or twisting stresses.

Hacksaw Blades Bi-Metal Unique? Safe Flex

Kennedy Hacksaw Blades Flexible Back Bi-Metal

The perfect combination of shatter resistant spring steel, used as the backing material, and tough, wear-resistant HSS teeth - Electron-beam welded together. Ideal for interrupted cuts in cramped places or where the blade is subject to stress caused by twisting or bending. Provides optimum tooth strength/life and reduced breakage and fracture when compared to traditional all-hard blades. Made to BS 1919 : Part 1: 1993.

Hacksaw Blades Ken-Cut? Flexible Back Bi-Metal HSS

Kennedy Industrial Power/Machine Saw Blades

10 - 14 Teeth Per Inch. Recommended for cutting small cross sections and hard stock. This is the most popular choice for machine shops that are cutting a wide variety of materials.

HSS All Hard Powersaw Blades

Suitable for Section Width 6 to 19mm (1/4" to 3/4")

Eclipse Hacksaw Blades Bi-Metal HSS

Flexible bi-metal blade, shatter resistant for safe use under stress and twisting.