Eclipse Plus 30 Hand Hacksaw Blades All Hard HSS

Rigid all hard ground blade for straight cuts every time, the workpiece must be securely held in a clamp or vice.

Kennedy HSS All Hard Hacksaw Blades

Fully hardened for extra long tooth life and maximum straightness of cut. For use where workpiece is held securely in place. Manufactured to BS 1919 : Part 1: 1993.

Eclipse Hacksaw Blades HSS

General purpose edge hardened blades, virtually unbreakable. Provides flexibility and safety but less wear resistance than an all hard or bi-metal blades.

Starrett Hand Hacksaw Blades

Redstripe High Speed Steel Blades. Ideal when the blade is not subject to bending and twisting stresses. Uniformly hardened blade holds the edge when cutting hard-to-machine alloys, maintaining the straightness of the cut.

Redstripe Hacksaw Blades HSS

Kennedy Industrial Power/Machine Saw Blades

6 Teeth Per Inch. Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.

HSS All Hard Powersaw Blades

Suitable for Section Width 13 to 38mm (1/2" to 1,1/2")

Kennedy Industrial Power/Machine Saw Blades

4 Teeth Per Inch. Recommended for cutting large sections of softer ferrous metals, most alloy steels and all non-ferrous metals. The increased gullet clearance is able to handle heavy chips without clogging.

HSS All Hard Powersaw Blades

Suitable for Section Width 19mm and above (3/4" and above)

Kennedy Industrial Power/Machine Saw Blades

10 - 14 Teeth Per Inch. Recommended for cutting small cross sections and hard stock. This is the most popular choice for machine shops that are cutting a wide variety of materials.

HSS All Hard Powersaw Blades

Suitable for Section Width 6 to 19mm (1/4" to 3/4")