Kobe? Water Separator

Continuously removes moisture from the air supply helping to prevent corrosion to the internal components of the air tool. The spring valve allows immediate draining of reservoir without any down time.

Kobe? Retractable Air and Water Hose Reel

For use on assembly lines, service vans, workshops, etc. Helps to eliminate air hose entanglement hazards in the workplace. Can be fixed to the wall or ceiling. UV stabilised impact resistant plastic case. Locking ratchet. Smooth retraction. 1.5m connection hose. Male inlet and outlet made from solid brass. High quality roll formed drive spring. PVC hose rated to 17bar. 160 pivot. Air tool hanging hole. Can be easily detached from the bracket.

HRR008 8mm x 12M Retractable Air & Water Hose Reel

Inlet/outlet hose connection 1/4 BSP.

Kobe? Plastic Air Blow Gun

Trigger operated blowgun with angled 110mm long nozzle lance. Lightweight impact resistant nylon body with hanging point, high grip handle with fitted 1/4" BSP brass air inlet ferrule. Suitable for quick removal of chips, swarf, dust and particulate from any surface. Ideal for production line, factory, workshop or body shop use. The long extended nozzle allows the airflow to be directed into the area it is required.

Specifications:
Operating temperature range: -10C to 50C.
Minimum working pressure: 43psi (3 bar).
Maximum operating pressure: 150psi (10 bar).

Kennedy® Pressure Gauges

Fitted with a 1/8" BSP brass thread, can be used to measure psi & bar readings and can be fitted directly onto any filter Regulator - Lubricators. Available in two diameter sizes (40mm & 50mm), made from tough ABS plastic. Back entry fittings.

PCL Tyre Inflation Equipment

Diecast lightweight body with pressed steel trigger. Replaceable valve assembly requires less maintenance. Impact absorbing rubber bumper and magnified scale for easy reading. Hose length of 53cm and body length of 270mm x 50mm. Scale: 0-140psi/0-10 bar. Each gauge is supplied with a certificate of calibration and operating instructions. Comply with EC directive 86/217/EEC (bar scale only).

Mk 3 Air Line Gauges

PCL Tyre Inflation Equipment

Designed for use on car tyres, commercial vehicles, motorcycles and general industrial applications. A pin unseats on connection to a tyre valve allowing air flow. Open end connection for use in conjunction with Air line gauges, wall gauges, tyrairs, portairs and pavement gauges. Scale reading of 140lbf/in2 and 0-10 bar.

Tyre Valve Connector

PCL Accura 1 Tyre Inflator

The Accura 1 is a robust yet sophisticated handheld electronic tyre inflator designed to break the mould of existing handheld tyre inflation. With leading electronics and sensor technology as well as patented software algorithms it offers fast, accurate and trouble-free tyre inflation and deflation. Robust electronic design with a modern, lightweight and shock resistant construction. Clear and easy to read digital display with a ceramic sensor and a built-in swivel and hanging device. Proprietary software increasing accuracy, fine metering and eliminating the chance of false readings. Direct valve design increasing inflation and deflation rates with an over pressure warning if pressure exceeds 12 bar / 174 lbf/in / 1200 kPa. Individually tested and certified, exceeds EC Directive 86/217/EEC.

Specifications:
Accuracy: Exceeds EC Directive 86/217/EEC.
Reading accuracy: 0.01bar / 0.2 lbf/in / 1kPa.
Maximum inflation pressure: 15bar / 218lbf/in 1500kPa.
Inflation range: 12bar / 174lbf/in / 1200kPa.
Operating temperature: -20C to 60C.

DAC1A06

230mm hose length, twin clip-on Type inflator.

PCL Airforce Tyre Inflators

Robust, lightweight handheld mechanical tyre inflator with a user-friendly dial display that offers fast, trouble-free tyre inflation. Suitable for tyreshops, garages, car dealers and transport depots. Clear dial display. Modern, lightweight and shock resistant construction. Proven Bourdon Tube with beryllium copper construction for robustness and high shock resistance. Direct valve design increasing inflation and deflation rates. Individually tested and certified. Built-in swivel and hanging device. Reduced operating costs - fast inflation and deflation rates. Increased customer service - high levels of speed, accuracy and safety. Reduced cost of ownership - long product life. High versatility - flexible usage. Guaranteed accuracy - individual testing, exceeds EC Directive 86/217/EEC Compliance - complies to BS EN 12645:1999.

PCL Plastic Blow Gun

BG5002
The body is moulded from a special acetalyc resin to resist damage, staining and contamination with a 100% brass inner valve. The blow gun adjusts the airflow gradually for delicate working. Suitable for use with both air and water. Recommended maximum working pressure of 18 bar (265psi).

PCL Accura 1 Tyre Inflator

The Accura 1 is a robust yet sophisticated handheld electronic tyre inflator designed to break the mould of existing handheld tyre inflation. With leading electronics and sensor technology as well as patented software algorithms it offers fast, accurate and trouble-free tyre inflation and deflation. Robust electronic design with a modern, lightweight and shock resistant construction. Clear and easy to read digital display with a ceramic sensor and a built-in swivel and hanging device. Proprietary software increasing accuracy, fine metering and eliminating the chance of false readings. Direct valve design increasing inflation and deflation rates with an over pressure warning if pressure exceeds 12 bar / 174 lbf/in / 1200 kPa. Individually tested and certified, exceeds EC Directive 86/217/EEC.

Specifications:
Accuracy: Exceeds EC Directive 86/217/EEC.
Reading accuracy: 0.01bar / 0.2 lbf/in / 1kPa.
Maximum inflation pressure: 15bar / 218lbf/in 1500kPa.
Inflation range: 12bar / 174lbf/in / 1200kPa.
Operating temperature: -20C to 60C.

DAC1A03

530mm hose length, twin hold-on Type inflator.