Oil Dispenser

17ltr - 6GR
Medium duty oil dispenser suitable for medium grade oils. Full rotary action pump. Rotationally molded medium density polyethylene container complete with nozzle storage drip holster. Height: 700mm.

Drum De-heading Tools

Suitable for removing tops of drums. Replacement blades available.

Steel - DDHS

Barrel Taps

Cast iron body (BTT2C) with brass faceplate for an excellent seal and easy flow control. 2” BSP Thread. Ideal for high viscosity fluids.

Drum Treacle Tap

Drip Trays

Galvanised steel self-colour. Integral carrying handles.

Plain Drip Tray

Barrel Adaptors

Converts from 70 x 6 male to 2" BSP female.

Blue (Mauser) - ADUSIBC

Barrel Taps

Polyethylene body BTP2. EPT gasket. 2" tapered thread.

Large Bore Tap - 2" BSP Thread

Diesel/Fuel Electrical Pump

The pump is designed exclusively for pumping diesel and fuel oil of the Hazard Class A III in areas that do not carry a risk of explosion. The temperature of the delivered fuel must be between -10°C and 35°C. Flow rate: 52ltr/min. 230V. Length of suction hose 1.6m, delivery hose 4m.

Pressol 750ml Trigger Spray Industrial Dispenser

Sprayer head with adjustable and closeable plastic nozzle. Suitable for various chemicals, e.g. detergents, solvents and cleaning agents (not suitable for acetone, glykol, ammonia, break cleaners and acids like formic acid and acetic acid). Stable conical bottle design.

Capacity: 750ml.
HDPE (high density polyethylene).
Colour: Orange.
Height: 290mm.
Base dia: 100mm.
Weight: 0,12kg.

Pressol 750ml Trigger Spray Economy Dispenser

Sprayer head with adjustable and closeable plastic nozzle. For water-based, non aggressive liquids. Stable conical bottle design. Ideal for household use.

Capacity: 750ml.
HDPE (high density polyethylene).
Colour: Orange.
Height: 280mm.
Base dia: 100mm.
Weight: 0,11kg.

All Purpose Drip Tray

For protecting floor surfaces and coverings to prevent any unsightly stains or puddles that would make the storage area floor dirty or slippery. Suitable for catching those small parts during maintenance. If placed under the catch tank while changing oils, any spillage is contained and during ratio changes it is ideal for catching bearings, springs etc preventing contamination. The tray is made of moulded plastic with integral carry handles. Internal dimensions: 330 x 520mm.