产品 / 切削工具 / 锉刀
编号：KEN0307230K
●产品描述：
Kennedy Engineers' Hand Files Industrial Quality
Engineers' Round Files have a diameter that tapers towards point. Suitable for internal and external concave surfaces. Available as Smooth Cut, Second Cut and Bastard Cut.
Round
Bastard Cut
编号：KEN0307410K
●产品描述：
Kennedy Engineers' Hand Files Industrial Quality
Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Available as Smooth Cut, Second Cut and Bastard Cut.
Square
Smooth Cut
编号：KEN0300420K
●产品描述：
Kennedy Engineers' Hand Files Industrial Quality
Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Available as Smooth Cut, Second Cut and Bastard Cut.
Square
Second Cut
编号：KEN0302010K
●产品描述：
Kennedy Engineers' Hand Files Industrial Quality
Engineers' Hand files have parallel edges, one edge uncut. For flat filing, corner filing and deburring. Multi-purpose and for other work where a 'safe' or uncut edge is needed. Double cut. Available as Smooth Cut, Second Cut and Bastard Cut.
Hand
Smooth Cut
编号：KEN0330080K
●产品描述：
Kennedy Needle Files Industrial Diamond-Coated 16cm
Available in seven shapes, Hand, Half Round, Three Square, Round, Square, Knife and Flat and two grain sizes, 120/140 and 325/400 offering the solution to finishing problems where material hardness makes conventional files ineffective. Plated with finely selected diamond powder, 120 - 150 mesh. Can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics, titanium etc.
Round
编号：KEN0316980K
●产品描述：
Kennedy Needle File Sets
Supplied in PVC Wallet. Manufactured to BS 498:1990. Cut 2. Available in a 6 or 12 piece set in either 14cm or 16cm.
16cm Needle File 6 Piece Set
Contents:
1x Flat.
1x Hand.
1x Half Round.
1x Round.
1x Square.
1x Three Square.
编号：KEN0300120K
●产品描述：
Kennedy Engineers' Hand Files Industrial Quality
Engineers' Flat Files have edges that taper towards front. Applications as for hand files but without safe edge. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc. Available as Smooth Cut, Second Cut and Bastard Cut.
Flat
Second Cut
编号：KEN0306230K
●产品描述：
Kennedy Engineers' Hand Files Industrial Quality
Engineers' Round Files have a diameter that tapers towards point. Suitable for internal and external concave surfaces. Available as Smooth Cut, Second Cut and Bastard Cut.
Round
Bastard Cut
编号：KEN0330040K
●产品描述：
Kennedy Needle Files Industrial Diamond-Coated 16cm
Available in seven shapes, Hand, Half Round, Three Square, Round, Square, Knife and Flat and two grain sizes, 120/140 and 325/400 offering the solution to finishing problems where material hardness makes conventional files ineffective. Plated with finely selected diamond powder, 120 - 150 mesh. Can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics, titanium etc.
Half Round
编号：KEN0307110K
●产品描述：
Kennedy Engineers' Hand Files Industrial Quality
Engineers' Flat Files have edges that taper towards front. Applications as for hand files but without safe edge. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc. Available as Smooth Cut, Second Cut and Bastard Cut.
Flat
Smooth Cut