Kennedy Engineers' Hand Files Industrial Quality

Edges taper towards point. For filing and sharpening saws. Points are left uncut. Instead of having a tang, both ends are tapered. They are used for sharpening saws having a 60 angle. The teeth are cut from each end towards the centre.

Double Ended Saw

Second Cut

Kennedy Engineers' Hand Files Industrial Quality

Engineers' Half Round Files have edges and surfaces that taper towards the point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Available as Smooth Cut, Second Cut and Bastard Cut.

Half Round

Second Cut

Kennedy Engineers' Hand Files Industrial Quality

Available with one or two round edges. Parallel edges, both edges cut for filing and sharpening saws.

Mill Saw

Second Cut

Kennedy Precision Hand Files Industrial Quality

Parallel edges, surfaces tapered towards end. Narrow version of hand file. For use where access is restricted. Available in tanged pattern 100mm (4") and 150mm (6") lengths. Manufactured to BS 498: 1990.

Pillar

Available in Cut 0, 2 and 4.

Kennedy Engineers' Hand Files Industrial Quality

Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Available as Smooth Cut, Second Cut and Bastard Cut.

Square

Second Cut

Kennedy Engineers' Hand Files Industrial Quality

Equilateral section (60 angles). Tapered towards point. For filing acute angles, internal corners and flat filing, clearing out square corners and for filing HSS tools after machining. Available as Smooth Cut, Second Cut and Bastard Cut.

Three Square

Bastard Cut

Kennedy Precision Hand Files Industrial Quality

One flat cutting surface with safe non-cutting back and sides. For precision filing of angles and flats. Available in tanged pattern 100mm (4") and 150mm (6") lengths. Manufactured to BS 498: 1990.

Barrette

Available in Cut 0, 2 and 4.

Kennedy Rasps

Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.

Half Round

Second Rasp Cut

Kennedy Precision Hand Files Needle Pattern (Round Handle)

Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.

Warding

Available in Cut 0, 2 or 4.

Kennedy Engineers' Hand Files Industrial Quality

Engineers' Round Files have a diameter that tapers towards point. Suitable for internal and external concave surfaces. Available as Smooth Cut, Second Cut and Bastard Cut.

Round

Smooth Cut