Solent Flaw Detector Inspection System

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Flaw Detector Developer

White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked.

Welders Anti-Spatter Fluid CO2 Prop

Solvent based coating that is applied to metal before welding. During welding small blobs of molten metal fall either side of the weld. These blobs are called spatter, this coating is applied before welding and prevents the spatter from sticking to the metal any spatter can be scraped from the surface. CO2 gas propelled aerosol. Totally non-flammable. Silicone-free and easily removed with solvents prior to galvanising or painting.
Size: 400g.



Strong anti-spatter effect. Totally non-flammable product. Excellent anti-rust coating. Easily removed with solvents prior to painting/galvanising. No silicones.

SOLENT Maintenance Welders Anti-Spatter Fluid - 20 Litres

Reduces the risk of joint puddling and greatly reduces preparation time prior to final painting. Does not affect any subsequent galvanising or painting operations. Evaporates under normal weld temperatures. Dichloromethane and silicone-free. Non-flammable, non-toxic, non-corrosive and biodegradable.
Dimensions (W x D x H): 295 x 245 x 384mm.
Weight: 21kg.