Senator® 24"/600mm Hi-Visibility Girder Section Spirit Level

Manufactured from impact resistant ABS plastic. Three vials horizontal, vertical and 45°. Metric and inch graduated face. Accuracy: 1mm/1000mm.

STB81SREM

Solid die cast aluminium bodied level, withstands knocks and drops and is conveniently sized to be easily carried and handled. Two super strong rare earth magnets for fantastic sticking power to steels and scaffold tubes.
Level vial accuracy guaranteed for 10 years.
Horizontal and vertical reading in both vial up and vial down positions.
Measurement accuracy: 0.029° = 0.5mm/m.
Size 250mm (10 in)
Weight 220 grams

Standard Laser Levels - 70L

Complete with a 70LJ 250mm/10" laser level, swivel base, deflection prism and target plate. Accuracy: horizontal /-0.5mm/m, /-0.06"/ft. Battery operating life: approx. 16 hours - 2 x AAA.

Box Section Spirit Level

Two vertical and one horizontal vials accurate to 0.5mm/M. Vials guaranteed to remain accurate for 10 years.
Overall length: 2000mm.

Kennedy Spirit Levels

Kennedy box section spirit levels are a tough dependable level for on site use all day everyday with factory set vials, an all aluminium body with one milled working face.and a hard wearing powder coat finish with plastic
protective end caps.

Accuracy: 0.048° (0.75mm/m.)

Kennedy 24" Box Section Spirit Level (600mm)

Aluminium Body with, powder coat finish.
3x Vials:
1x Horizontal.
1x Plumb.
1x 45 Degree.
Milled Working Face.
Accuracy: 0.75mm/M.

Girder Section Level 83S

With 3 vials. Milled working faces and die cast body. Electrostatic powder coated. Horizontal vial visible from 4 sides, vertical vials visible from 3 sides. Accuracy: Horizontal 0.029 (0.5mm/m). Vertical 0.043 (0.75mm/m).

Box Section Spirit Level

Box-section lightweight extra strong frame with soft-ribs' for strength and finger grip.

Accuracy:
Horizontal 0.029 (0.5mm/m);
Vertical 0.048 (0.75mm/m).



80AN
Features one vertical and one horizontal vial.

Stabila 80K-80 Hammer-Top Masons Spirit Level

80K-80
Based on the popular Type 80A, the Stabila 80K Hammer-Top Spirit Level has been specially developed for use by bricklayers. Made from extra strong but lightweight metal alloys, it features reinforcement ribs that make the level easier to handle. Along the top surface of the level is a hammer-top that allows you to correct any discrepancies in brickwork or paving directly, by lightly tapping with your trowel. It can also be used to check and adjust the level on tiles.
The level has a single vertical vial and a single horizontal vial. The horizontal vial has a viewing angle of up to 300° and also has six rings to allow the level to also be used with 1% and 2% slopes. At each end of the level, impact resistant end caps provide good shock-absorption in the event that the level is dropped.
Overall length: 800mm (32”).

Box Section Spirit Level

Box-section lightweight extra strong frame with soft-ribs' for strength and finger grip.

Accuracy:
Horizontal 0.029 (0.5mm/m);
Vertical 0.048 (0.75mm/m).



80AN
Features one vertical and one horizontal vial.

Box Section Spirit Level

Box-section lightweight extra strong frame with soft-ribs' for strength and finger grip.

Accuracy:
Horizontal 0.029 (0.5mm/m);
Vertical 0.048 (0.75mm/m).



80AN
Features one vertical and one horizontal vial.