Box Section Spirit Level

Box-section lightweight extra strong frame with soft-ribs' for strength and finger grip.

Accuracy:
Horizontal 0.029 (0.5mm/m);
Vertical 0.048 (0.75mm/m).



80AN
Features one vertical and one horizontal vial.

Boat Level

Shockproof, with 2 vials. Milled working face. Die cast body, electrostatic powder coated. Accuracy: Horizontal 0.029 (0.5mm/m). Vertical 0.043 (0.75mm/m).

Box Section Spirit Level

Two vertical and one horizontal vials accurate to 0.5mm/M. Vials guaranteed to remain accurate for 10 years.
Overall length: 2000mm.

Box Section Spirit Levels

With 2 vials (1 x horizontal, 1 x vertical). Electrostatic powder coated. Accuracy: Horizontal 0.057 (1.0mm/m); Vertical 0.048 (0.75mm/m).

70-2:

Box Section Spirit Level

Box-section lightweight extra strong frame with soft-ribs' for strength and finger grip.

Accuracy:
Horizontal 0.029 (0.5mm/m);
Vertical 0.048 (0.75mm/m).



80AN
Features one vertical and one horizontal vial.

Box Section Spirit Level

Box-section lightweight extra strong frame with soft-ribs' for strength and finger grip.

Accuracy:
Horizontal 0.029 (0.5mm/m);
Vertical 0.048 (0.75mm/m).



80A-2
Features two vertical and one horizontal vials accurate to 0.5mm per metre. Vials guaranteed to remain accurate for 10 years. Electrostatic powder coated abrasive resistant frame.

Stabila 80K-80 Hammer-Top Masons Spirit Level

80K-80
Based on the popular Type 80A, the Stabila 80K Hammer-Top Spirit Level has been specially developed for use by bricklayers. Made from extra strong but lightweight metal alloys, it features reinforcement ribs that make the level easier to handle. Along the top surface of the level is a hammer-top that allows you to correct any discrepancies in brickwork or paving directly, by lightly tapping with your trowel. It can also be used to check and adjust the level on tiles.
The level has a single vertical vial and a single horizontal vial. The horizontal vial has a viewing angle of up to 300° and also has six rings to allow the level to also be used with 1% and 2% slopes. At each end of the level, impact resistant end caps provide good shock-absorption in the event that the level is dropped.
Overall length: 800mm (32”).

Laser Level Accessories

For use with all Stabila laser levels.

Laser Goggles

Girder Section Level 83S

With 3 vials. Milled working faces and die cast body. Electrostatic powder coated. Horizontal vial visible from 4 sides, vertical vials visible from 3 sides. Accuracy: Horizontal 0.029 (0.5mm/m). Vertical 0.043 (0.75mm/m).

Stabila Spirit Levels

Stabila?s 96 series spirit levels have an extra strong light metal rectangular profile with gripping ridges and removable end cap which also have a well-proven anti-slip stops.
Two milled measuring surfaces for accurate readings every time.

96 Series Spirit Levels Non-Magnetic

Specification:
2 vertical vials and 1 horizontal vial.
Measurement accuracy: in normal position 0.029 = 0.5 mm /m,
overhead measurement 0.043 = 0.75 mm/m.