Stabila 80K-80 Hammer-Top Masons Spirit Level

80K-80
Based on the popular Type 80A, the Stabila 80K Hammer-Top Spirit Level has been specially developed for use by bricklayers. Made from extra strong but lightweight metal alloys, it features reinforcement ribs that make the level easier to handle. Along the top surface of the level is a hammer-top that allows you to correct any discrepancies in brickwork or paving directly, by lightly tapping with your trowel. It can also be used to check and adjust the level on tiles.
The level has a single vertical vial and a single horizontal vial. The horizontal vial has a viewing angle of up to 300° and also has six rings to allow the level to also be used with 1% and 2% slopes. At each end of the level, impact resistant end caps provide good shock-absorption in the event that the level is dropped.
Overall length: 800mm (32”).

Stabila Laser Levels

Self-levelling LAX200 crossed line laser: innovative technology such as a casing that can turn through 360, a parked position, locking mechanism and ultra-sharp, long laser lines. Ideal for tilers, dry wallers, carpenters and joiners, electricians, plumbers, steel erectors and bricklayers.

Ideal for inside work: the casing in the U-shaped holder can be rotated through 360. The complete room can be scanned.
Self-levelling, ultra-sharp, long laser lines.
Locked position: allows slopes to be marked.
Pulsed lines for external applications: working range up to 250 metre with the REC210 line receiver. (ONLY included in the complete kit.)
Easy positioning: on the ground, on a tripod, on metal with the V groove and the rare earth magnet, on the wall bracket* (*included in the complete kit).
Perfect protection for the measuring unit: automatic pendulum locking. The optical equipment is fully protected in the parked position. Optimal dust protection.
Robust: Stabila anti-shock-system with impact-absorbent cover. Optimal protection for the casing also at corners and edges.
Rare earth magnet and V groove = rapid alignment on rectangular and round metal bars and pipes thanks to the rotating casing.

LAX200 Cross Line Lasers

LAX200 Specification:
Laser class: 2.
Output: < 1mW.
Laser wavelength: 635nm.
Self-levelling range (horizontal) approx: 4.5.
Levelling accuracy: 0.3 mm/m.
Line straightness: 0.2mm/m.
Range, visible crossed line: 20 metre indoors under typical operating conditions.
Range with receiver: Up to 250 metre (included in complete kit ONLY).

Supplied complete with belt pouch.

Standard Laser Levels - 70L

Complete with a 70LJ 250mm/10" laser level, swivel base, deflection prism and target plate. Accuracy: horizontal /-0.5mm/m, /-0.06"/ft. Battery operating life: approx. 16 hours - 2 x AAA.

Box Section Spirit Level

Two vertical and one horizontal vials accurate to 0.5mm/M. Vials guaranteed to remain accurate for 10 years.
Overall length: 1500mm.

Boat Level

Shockproof, with 2 vials. Milled working face. Die cast body, electrostatic powder coated. Accuracy: Horizontal 0.029 (0.5mm/m). Vertical 0.043 (0.75mm/m).

Box Section Spirit Level

Two vertical and one horizontal vials accurate to 0.5mm/M. Vials guaranteed to remain accurate for 10 years.
Overall length: 2000mm.

Box Section Spirit Level

Box-section lightweight extra strong frame with soft-ribs' for strength and finger grip.

Accuracy:
Horizontal 0.029 (0.5mm/m);
Vertical 0.048 (0.75mm/m).



80A-2
Features two vertical and one horizontal vials accurate to 0.5mm per metre. Vials guaranteed to remain accurate for 10 years. Electrostatic powder coated abrasive resistant frame.

Stabila OLS 26 Optical Level

OLS 26
Optical builders level 26x magnification. Reliable reading & transfer of heights. Robust casing, easy grip, shock absorbing soft shell and solid protection of optical unit. Protection class IP54.
Weight: 2.50kg.

Box Section Spirit Levels

With 2 vials (1 x horizontal, 1 x vertical). Electrostatic powder coated. Accuracy: Horizontal 0.057 (1.0mm/m); Vertical 0.048 (0.75mm/m).

70-2:

Stabila Spirit Levels

Stabila?s 96 series spirit levels have an extra strong light metal rectangular profile with gripping ridges and removable end cap which also have a well-proven anti-slip stops.
Two milled measuring surfaces for accurate readings every time.

96 Series Spirit Levels Non-Magnetic

Specification:
2 vertical vials and 1 horizontal vial.
Measurement accuracy: in normal position 0.029 = 0.5 mm /m,
overhead measurement 0.043 = 0.75 mm/m.