产品 / 紧固件/工具
编号：QFT6023388C
●产品描述：
Socket Set Screws
High tensile alloy steel. Grade 14.9. DIN 913.
Metric sizes - Flat Point - Self Colour
For use where parts are frequently reset. This style of point causes the least amount of damage to the component it locks on to. Can be used against hardened shafts, preferably with a ground flat for improved surface contact. Ideal for use as an adjusting screw and in thin wall thicknesses and on soft plugs.
编号：CTL6314405F
●产品描述：
High Tensile Hexagon Head Bolts
UNC Thread. BS1768, Grade S. Self colour.
Inch (UNC) - Self Colour
编号：QFT6043009K
●产品描述：
Socket Head Flange Button Screws
An extra wide flange below the button head makes these fasteners ideal for fixing strips cover plates and sheet metal housings that require a greater load spread. Dimensions to BS EN ISO 898/1 Grade 10.9 DIN 267.
Metric Sizes - Standard Self Colour
编号：MTL9369290K
●产品描述：
Heavy Duty Stainless Steel Bolt Clamps
Heavy duty bolt clamps to DIN 3017 are specifically designed to give extremely high band tension for sealing pressure/suction lines with either steel or plastic reinforcement and high shore hardness. Reinforced loops withstand significantly higher torques and the mechanically locked closure has no welding points and therefore no contact corrosion. Bridge gives optimal hose protection and the robust band with rounded edges for protection against injuries and/or damage to the hose surface. The band, housing and screw are all made from high grade 316 Stainless steel.
编号：MTL6341500K
●产品描述：
Matlock Masonry Nails
Corrosion-resistant hardened nails commonly used by carpet fitters, floor layers, floor fitters and are suitable for general construction applications.
编号：CTL6550317P
●产品描述：
Spring Tension Pins
Carbon steel. Self colour.
Metric
编号：CTL6301852M
●产品描述：
High Tensile Hexagon Head Bolts
DIN 931, Grade 8.8.
Metric Sizes - Bright Zinc Plated
编号：QFT6052218V
●产品描述：
Socket Head Countersunk Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.
Inch (UNC) - Standard Self Colour
编号：HEL6223337T
●产品描述：
UNC Helicoil Hand Taps
Used to tap through and blind holes to produce threads all the way to the bottom.
Bottoming Taps
编号：CTL6314430E
●产品描述：
High Tensile Hexagon Head Bolts
UNC Thread. BS1768, Grade S. Self colour.
Inch (UNC) - Self Colour