Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Metric

Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (Metric)

Available in packs of 10 and 50.

A2 Stainless Steel - Countersunk

A2 Stainless Steel - Countersunk

A2 Stainless Steel Pan Slotted Machine Screws

Manufactured from Stainless steel to prevent rusting or where high temperatures are a consideration.

Socket Head Button Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Inch (UNC) - A2 Stainless Steel

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3 - 1936 Series.

Inch (UNC) - Self Colour

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. UNC/UNF Dimensions to ANSI B 18.3. BSW/BA Dimensions to BS 2470.

Inch (UNF) - Standard Self Colour

Washers

Bright Zinc plated. Internal shakeproof washers.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Qualfast High Quality Screwed Studding

Colour-coded at each end of length for easy identification as shown.

Yellow = Metric
Green = BSF
Blue = UNF
Red = BSW
White = UNC
Orange = Grade 8.8
Black =
Stainless Steel

Mild Steel - Grade 4.6 Zinc-Plated - Metric

Low Head Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. DIN 7984.

Metric Sizes - Self Colour