A2 Stainless Steel - Button Head

Pin Hex security screws with internal pin within the socket - prevents the use of standard hex keys. Suitable for medium torque applications.

A2 Stainless Steel Wing Nuts

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Conform to ANSI B18.17.

Metric

Kennedy® Fix-it Kits

3/16 x 1/2, 3/16 x 3/4, 3/16 x 1, 1/4 x 3/4, 1/4 x 1, 1/4 x 1 1/4, 5/16 x 3/4, 5/16 x 1, 5/16 x 1 1/2, 3/8 x 3/4, 3/8 x 1, 3/8 x 1 1/2.

Socket Capscrews - UNF

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Inch

Sizes 1/8" are manufactured from hardened silver steel, 3/16" and above are high quality case hardened mild steel.

Hammer-In Fixings (Assembled)

For fast, repetitive fixing with minimal use of
screwdriver required. Reinforced screwhead facilitates
high knock-in loads with the added benefit of plug neck grip. Hammer in drive screw for fast installation. Extended expansion zone gives extra grip. Suitable for use in concrete, stone, brickwork and blockwork.

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 916.

Metric sizes - Plain Cup Point - Self Colour

For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.

Socket Head Cap Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Hexagon Full Nuts

Zinc plated. Conform to DIN934.

Metric

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 915.

Metric sizes - Dog Point - Self Colour

For permanent location of one part to another. The point is generally centre spotted and a location hole drilled in the shaft or ground flat where location is made.

Washers

Bright Zinc plated. Single coil square section spring washers. DIN 7980.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces