Socket Head Shoulder Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for replacing costly components such as shafts, pivots, guides, pins, linkages and trunion mountings. Also commonly used in the die mould industry. Maximum operating temperature (unplated): 300C. Dimensions to Body Diameter Tol h8.

Metric Sizes - Standard Self Colour

Metric Helicoil Machine Taps

For tapping through holes, the geometry of the tap forces the swarf forward out of the bottom of the hole being tapped.

Spiral Point Taps

Socket Head Cap Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Inch (UNC) - A2 Stainless Steel

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (UNF)

Available in packs of 10 and 50.

Heavy Duty Stainless Steel Bolt Clamps

Heavy duty bolt clamps to DIN 3017 are specifically designed to give extremely high band tension for sealing pressure/suction lines with either steel or plastic reinforcement and high shore hardness. Reinforced loops withstand significantly higher torques and the mechanically locked closure has no welding points and therefore no contact corrosion. Bridge gives optimal hose protection and the robust band with rounded edges for protection against injuries and/or damage to the hose surface. The band, housing and screw are all made from high grade 316 Stainless steel.

High Tensile Hexagon Head Bolts

BS1768. Grade S.

Inch (UNF) - Self Colour

Spring Tension Pins

Carbon steel. Self colour.

Metric

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 913.

Metric sizes - Flat Point - Self Colour

For use where parts are frequently reset. This style of point causes the least amount of damage to the component it locks on to. Can be used against hardened shafts, preferably with a ground flat for improved surface contact. Ideal for use as an adjusting screw and in thin wall thicknesses and on soft plugs.

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - A2 Stainless Steel

Washers

Bright mild steel flat washers. Metric Form A. DIN125. Plain edge.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces