Washers

Metric Form B. BS4320. Plain edge.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

A2 Stainless Steel - Button Head

Pin Hex security screws with internal pin within the socket - prevents the use of standard hex keys. Suitable for medium torque applications.

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to DIN7991.

Metric Sizes - Standard Self Colour

Socket Head Countersunk Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

High Tensile Hexagon Head Set Screws

Metric thread. Manufactured from Grade 8.8 zinc plated. Conform to DIN 931.

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (UNC)

Available in packs of 10 and 50.

Pozi Countersunk Self Tapping Screws A2 Stainless Steel

Self tapping stainless steel screws. For use on sheet metal and other malleable materials. Can be used safely in the food industry. DIN: 7982 C Z.

Round Wire Nails

Round wire nails are large round head nails that are mostly used for rough carpentry where appearance is not important but strength is essential.
Sizes from 25 to 150mm
(1” to 6”). Available in 500g,
1kg, 2kg and 5kg packs.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BA) - Self Colour

Hex Washer Head Self Drilling Screws - BZP

Hexagon head with collar, self drilling screws. Made from case hardened steel, bright zinc plated. Manufactured to DIN 7504 K.