Metric HeliCoil Inserting Tools

Tool style 2. For all technical specifications please refer to our catalogue.

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.

Inch (BA) - Standard Self Colour

Metric Helicoil Hand Taps

For tapping through holes and blind holes. The lead chamfer permits easier starting and requires less torque than bottoming taps.

Finishing Taps

Spring Tension Pins

Carbon steel. Self colour.

Metric

Socket Head Countersunk Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 913.

Metric sizes - Flat Point - Self Colour

For use where parts are frequently reset. This style of point causes the least amount of damage to the component it locks on to. Can be used against hardened shafts, preferably with a ground flat for improved surface contact. Ideal for use as an adjusting screw and in thin wall thicknesses and on soft plugs.

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - Self Colour

A2 Repair/Mudguard/Penny Washers

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. TAble 3 LIght BS4310.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN916.

Metric Sizes - Knurled Cup Point - Self Colour

For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above M6 are generally counterbored to provide maximum clamping efficiency.

High Tensile Hexagon Head Bolts

DIN 931. Grade 8.8.

Metric Sizes - A2 Stainless Steel