Plastic Wall Plugs

Truly universal plug which fixes into any wall, ceiling or floor. Unique design with expansion throughout the length of the plug. Expands at the top giving instant grip. Anti-rotation features prevent spinning in the hole.
Hole diameters: 6.0, 7.0 and 8.0mm.

Typical applications:
Shelving and cabinets, suspended ceilings, switch boxes, trunking and cable trays.
Boilers, water heaters and radiators.
Suitable for use in, concrete, brickwork, stone, blockwork, plasterboard etc.

Colours: red, brown and blue (blue plug image unavailable).

Available in packs of 80, 96 and 1000 plugs.

Uno

Kennedy Cotter Pins

Manufactured form mild steel. Self colour.

Inch

Silver-TT? Twin Thread Woodscrews

Ideal for power driving into hard wood, soft wood, MDF and chip-board. High helix double thread, ?drives home? in half the time of standard screws. Precision manufactured, thinner shank reduces wood splitting. Fully heat-treated and extremely hard for high resistance to breakage in high torque applications. Plated to five microns for greater corrosion-resistance. 35 point angle usually needs no pilot hole.

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to DIN 7991.

Metric Sizes - Bright Zinc Plated

Hexagon Full Nuts

Self colour. Conform to DIN 934.

Inch (BSW)

Spring Tension Pins

Carbon steel. Self colour.

Metric

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (BSP)

Available in packs of 10 and 50.

High Tensile Hexagon Head Set Screws

UNC Thread. BS1768. Grade S. Self Colour.

High Tensile Hexagon Head Bolts

UNC Thread. BS1768, Grade S. Self colour.

Inch (UNC) - Self Colour

Matlock Oval Brad Nails

Used when concealment is required or when there is danger that the use of round plain head nails would split the wood. The oval brad head is tapped below the level of the timber in door frames, floor and skirting boards.