产品 / 紧固件/工具
编号：QFT6008056G
●产品描述：
Socket Head Cap Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.
Metric Sizes - Bright Zinc Plated
编号：KEN6208840K
●产品描述：
Kennedy Professional Threading Inserts
Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.
Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.
Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.
For all dimensional specifications please refer to our catalogue.
Wire Threading Inserts (BSP)
Available in packs of 10 and 50.
编号：QFT6032934V
●产品描述：
Socket Set Screws
High tensile alloy steel. Grade 14.9. BS 2470. For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above 1/4? are generally counterbored to provide maximum clamping efficiency.
Inch (BSW) - Knurled Cup Point - Self Colour
编号：CTL6328863P
●产品描述：
High Tensile Hexagon Head Set Screws
High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.
Metric
编号：QFT6001051H
●产品描述：
Socket Head Cap Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.
Metric Sizes - Self Colour
编号：KEN6207640K
●产品描述：
Kennedy Professional Threading Inserts
Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.
Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.
Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.
For all dimensional specifications please refer to our catalogue.
Wire Threading Inserts (Metric)
Available in packs of 10 and 50.
编号：QFT6371416S
●产品描述：
A2 Stainless Steel - Button Head
A2 Stainless Steel - Button Head
编号：CTL6415116S
●产品描述：
Hexagon Full Nuts
Self colour. Conform to DIN 934.
Inch (BSW)
编号：CTL6300319M
●产品描述：
High Tensile Hex Set Screws
Manufactured from grade 8.8 steel self colour. Conform to BS3692 DIN931.
Metric
编号：KEN6513240K
●产品描述：
Kennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.