Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3.

Inch (UNF) - Self Colour

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Inch

Sizes 1/8" are manufactured from hardened silver steel, 3/16" and above are high quality case hardened mild steel.

Socket Head Countersunk Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - A2 Stainless Steel

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (Metric)

Available in packs of 10 and 50.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

A2 Stainless Steel - Button Head

Pin Hex security screws with internal pin within the socket - prevents the use of standard hex keys. Suitable for medium torque applications.

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - Bright Zinc Plated

A2 Stainless Steel - Button Head

Pin Hex security screws with internal pin within the socket - prevents the use of standard hex keys. Suitable for medium torque applications.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BSW) - Self Colour

High Tensile Hexagon Head Bolts

UNC Thread. BS1768, Grade S. Self colour.

Inch (UNC) - Self Colour