产品 / 紧固件/工具
编号：QFT6023221D
●产品描述：
Socket Set Screws
High tensile alloy steel. Grade 14.9. DIN 915.
Metric sizes - Dog Point - Self Colour
For permanent location of one part to another. The point is generally centre spotted and a location hole drilled in the shaft or ground flat where location is made.
编号：MTL6625960K
●产品描述：
Stainless Steel Hose Clip Set
Non-slip worm drive. Precision manufactured from 304 stainless steel. For automotive, gas, plumbing and agricultural applications. Contains sizes 000 to size 2X. (9mm to 60mm diameter).
编号：KEN6512080K
●产品描述：
Kennedy Extractable Dowels
Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.
编号：QFT6023129H
●产品描述：
Socket Set Screws
High tensile alloy steel. Grade 14.9. DIN914.
Metric sizes - Cone Point - Self Colour
For permanent location of parts. Deep penetration for maximum radial and axial fixing power. Can be used as pivots and where fine adjustment is required.
编号：RAW6657714B
●产品描述：
Rawl Wedge Anchors
Zinc plated standard type. Provide permanently fixed threaded sockets in concrete. Allows both bolts and threaded rods to be installed and removed without damaging the anchor.
Wedge Anchors (Pk of 50)
编号：CTL6465416G
●产品描述：
A2 Repair/Mudguard/Penny Washers
Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. TAble 3 LIght BS4310.
Metric
N.B. Priced Individually - Standard Box Quantity = 100 Pieces
编号：CTL6463806H
●产品描述：
A2 Stainless Steel Table 3 Light Washers
N.B. Priced Individually - Standard Box Quantity = 100 Pieces
编号：QFT6023468L
●产品描述：
Socket Set Screws
High tensile alloy steel. Grade 14.9. DIN 915.
Metric sizes - Dog Point - Self Colour
For permanent location of one part to another. The point is generally centre spotted and a location hole drilled in the shaft or ground flat where location is made.
编号：QFT6052386G
●产品描述：
Socket Head Countersunk Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.
Inch (UNF) - Standard Self Colour
编号：KEN6509160K
●产品描述：
Kennedy Quality Industrial Dowel Pins
Hardened and precision ground. Conform with BS 1804.
Inch
Sizes 1/8" are manufactured from hardened silver steel, 3/16" and above are high quality case hardened mild steel.