Hexagon Full Nuts

Self colour. Conform to DIN 934.

Inch (BSW)

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BSF) - Self Colour

Socket Head Button Screws

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.

Inch (UNC) - A2 Stainless Steel

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.

Inch (BA) - Standard Self Colour

Pozi Flange Head Self Tapping Screws - Black

Flange head, cross-recessed Z self tapping screws. Type C (AB). Made from case hardened steel, black zinc plated. DIN: 968 C Z.

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. UNC/UNF Dimensions to ANSI B 18.3. BSW/BA Dimensions to BS 2470.

Inch (BA) - Standard Self Colour

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BSW) - Self Colour

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 916.

Metric - Plain Cup Point - A2 Stainless Steel

For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.

Kennedy Thread Repair

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Thread Insert Kits (BSP)

Each Kennedy Professional Thread Repair Wire Insert Kit is supplied complete with a Hand Tap, Inserting Tool and Inserts.

A2 Stainless Steel Square Spring Washers

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Conform to DIN 7980.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces